This Ceramic tiled shower cubicle was installed at house in Birmingham, although the Ceramic tiles were in reasonable condition the customer wanted the grout to be refreshed. Ten years ago it would have been necessary to scrape out the top layer of grout and replace however the modern grout colourant kits allow you to achieve the same effects for a lot less expense.
Cleaning Tile and Grout
The first job was to clean the grouting with a dilution of Tile Doctor Pro-Clean worked in by hand using a scrubbing brush, we also removed the towel radiator on one wall to make sure we could get to the grout behind. Pro-Clean is a very effective tile and grout cleaner that’s good at getting grease & grime out of the grouting, this process also provides a good foundation for the grout colourant which needs a clean surface. If you’re cleaning the grout yourself you may want to consider using Tile Doctor Oxy-Pro instead as it’s a similar product that is ready to use.
Once the grout was dry Grout Colourant in a Linen colour was applied into the grout lines and the excess wiped off, I then cleaned off all the excess Grout Colourant from the tile surface and gave the tiles a good clean. As you can see it made a big difference to the bathroom and I think you will agree the choice of Linen colourant worked well and blended in well with the colour of the tiles needless to say the customer was delighted.
I should mention that the Grout Colourant range supplied by Tile Doctor also seals the grout preventing it from staining and therefore ensuring it will look good for some time to come.
Source: Grout Colouring service in Staffordshire