Restoring the Appearance of Grout on a Tiled Kitchen Worktop

Tiled kitchen worktops work really well, but just like any other kind of tiled surface they will need regular cleaning and maintenance to keep them looking great. Kitchen worktops in particular can fall into poor condition quickly when exposed to all manner of dirt and stains resulting from food preparation, with the grout lines often suffering the most which if you have tiles in your shower is a problem I’m sure you will be familiar with.

Mosaic tiled worktop before grout colouring

The grout lines on this Mosaic tiled kitchen worktop had become discoloured following years of exposure to soaps and washing up liquid from the nearby sink, as well as, most likely, food and drink spillages. The property was in the picturesque village of Silverdale, Morecambe Bay, and the owner had decided it was time to have the worktop professionally refreshed. This was a job that would only take a few hours to complete, and would involve both grout cleaning and recolouring.

Mosaic tiled worktop before grout colouring

Cleaning and Recolouring Dirty Grout for a Mosaic Worktop

Before beginning the restoration, I had to decide upon the best method. I realised that if I took out the grout to replace it completely I may have dislodged or even damaged the tiles – especially considering that they are at least 30 years old and give the age of the tiles it would be difficult if not impossible to find replacements if they were damaged.

As a result, I opted to clean the tiles and grout using Tile Doctor Oxy Gel. This product is a strong alkaline-based cleaner in gel form designed to break down dirt and grime, including soap scum and mildew stains. While it can be used on both horizontal and vertical surfaces, it is particularly suitable for the latter as the gel is able to dwell for a long time without running down the wall. Oxy Gel proved to be very effective in restoring the grout lines to top form, but I chose to follow by steam cleaning the area to get rid of any bacteria.

Mosaic tiled worktop during grout colouring

To finish the restoration, I recoloured the grout lines using our fresh White grout colourant – one of 10 available colours. Tile Doctor’s grout colourant seals and rejuvenates existing grout joints, and is equally effective for interior or exterior applications, including bathrooms and kitchens. The colourant was left for a little while to cure, before I polished off the excess with white sponge pads.

Mosaic tiled worktop after grout colouring

The result was a quick and effective transformation for the Mosaic tiled kitchen worktop that left the customer very happy!
 
 
Source: Worktop Tile and Grout Maintenance Service in Lancashire

Removing Mould from Shower Cubicles

This ceramic tiled shower cubicle was installed at house in Silverdale, you can see from the photographs below that there was staining from the chemicals in domestic products and there was also a build-up of mould on some parts of the grout and silicone sealant. Mould can get a grip here due to a porous top layer and this is especially a problem in the UK where bathrooms tend to be small with inadequate ventilation.

Shower Cubicle Silverdale Before Shower Cubicle Silverdale Before

Cleaning Tile and Grout

The ceramic tiles and grout was treated using Tile Doctor Oxy Pro which is a ready to use tile and grout shower cleaner that comes with a trigger spray attachment which allows the cleaner to mix with air making it lighter and allowing it to stick to vertical surfaces. It was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.

Unfortunately it’s not possible to remove mould from silicone sealant, the only solution is to have it stripped off and replaced. Once this was done the edges were cleaned up and fresh mould resistant silicone was applied.

It’s worth mentioning at this point that silicone will last longer if the residue from soaps, shampoos and body washes etc. are rinsed away with clean water after having a shower as it’s the chemical and not the water that damages the silicone in the first place.

Shower Cubicle Silverdale After Shower Cubicle Silverdale After

The results are plain to see and my customer was very satisfied with the work.

Prevention is always better than the cure and another tip you might find useful is to improve ventilation which is a major problem with draught free modern housing fitted with insulation and double glazing, if this is not possible try leaving your shower room door wide open after having a shower. Another option is to look at installing a ventilation and heat recovery system which extracts the hot air from kitchens and bathrooms through a heat exchanger to warm up fresh air from outside and recycles it back into the house.
 
 
Source: Cleaning and Sealing a Slate Tiled Shower room in Lancashire