Sealing Grout with a Pippette in a Westmancote Kitchen

This customer who lives in the old picturesque village of Westmancote, Gloucestershire asked me to do a home survey on their ceramic kitchen tiles which had been laid around fifteen years prior. With the exception of general cleaning not much had work had been done to the tile and grout and now the tiles were looking dull and the grout had turned black.

Ceramic Tiled Floor Westmancoate before cleaning

As part of the survey I ran a test clean on part of the floor and the tile and grout came up really well which convinced the customer to give me the job and I was soon booked in to return to complete the floor and work my magic.

Ceramic Tiled Floor Westmancoate before cleaning Ceramic Tiled Floor Westmancoate Cleaning Grout Lines

Deep Cleaning Ceramic Tile and Grout

The first job was to give the floor a sweep to remove any grit and then I set about cleaning the grout lines. The grout had trapped a lot of dirt so I decided to start with the application of Tile Doctor Remove and Go which is a strong cleaner/stripper that is safe to use on all types of tile and grout. The Remove and Go was left to soak into the grout for about ten minutes before being scrubbed in with a stiff grout brush. This process released the dirt and the now soiled solution was rinsed away using water which was then extracted using a wet vacuum.

Next step was to turn my attention to the Ceramic tiles which needed a deep clean so this time I applied a medium dilution of Tile Doctor Pro-Clean, left to dwell for ten minutes then ran over the tiles with tan pad fitted to a rotary buffing machine. Once the floor was done I rinsed away the soiled cleaning solution with water and extracted with the wet vacuum.

Sealing Floor Grout

I find it’s always the grout that lets down the appearance of a Ceramic tiled floor which are usually fairly maintenance free, to guard against this I always recommend the grout is sealed. Given the condition of the grout in this case it was definitely a good idea as I’m sure it wouldn’t be long before it started to discolour again.

With this in mind I sped up the drying of the grout lines with a heat gun and once done I sealed the grout lines using Tile Doctor Ultra Seal applied carefully with a Pipette.

Ceramic Tiled Floor Westmancoate after cleaning Ceramic Tiled Floor Westmancoate after cleaning

The customer was pleased with the end result and left the following feedback via the Tile Doctor feedback system.

Very professional work. We were sold on it when he came to quote and did a small patch clean. Malcolm was able to come within a few days of confirming his price was acceptable and the job was done swiftly and to an excellent standard. We now have a new floor!
 
 
Source: Tile and Grout Cleaning and Restoration in Gloucestershire

New but Discoloured Grout refreshed in a Warrington Kitchen

It can be amazing and equally frustrating just how quickly grout can become dirty and discoloured. I was recently contacted by a couple in Warrington to see if I could help them with their Ceramic tiled kitchen floor that had only been laid six months earlier. To their dismay, in that short time the grout had become discoloured and difficult to clean. They had given up trying to resolve the situation by themselves and so turned to Tile Doctor for some professional assistance.

Naturally I was happy to assist and so arranged to visit the property to conduct a small cleaning test where I demonstrated how with a combination of the right tools and products I could indeed get the grout lines clean again. Seeing the results of the test, the couple were more than happy to book me to complete the job.

Kitchen tiles before cleaning and grout recolour in Warrington

Grout Cleaning for Dirty Ceramic Tiles

On my return to the property, I repeated the same successful test clean across the entirety of the floor. This involved the application firstly of Tile Doctor Remove and Go, which is a strong cleaner, stripper and degreaser. I scrubbed the product thoroughly into all the grout lines, making sure I did not miss any dirt and stains.

I then started to clean the Ceramic floor tiles using our high alkaline cleaner, Tile Doctor Pro Clean. This was scrubbed into the floor in a similar fashion to the Remove and Go and then rinsed off with plain water extracting the waste water with a Wet Vat. The floor was left to dry over lunchtime.

Recolouring Grout for Ceramic Tiles

In the afternoon, I explained that whilst I could get the grout clean it was only a matter of time before it became dirty again. So, to provide a permanent solution I recommended to the customer that we apply an epoxy Grout Colourant, which adds a protective barrier over the grout. An alternative would have been to apply a Grout Sealer however this is best applied to new grout and in this case would not have guaranteed the uniform appearance required.

Before applying the Grout Colourant, I made sure the grout lines were dry by giving them a quick blast with a heat gun. I then started to colour the grout lines with our White Grout Colourant, which is part of a range made by Tile Doctor and is available in ten popular colours, including Black, Charcoal Grey and even Cappuccino Brown.

The difference made to the floor was quite remarkable. Not only is the grout now a uniform brilliant white, but it should remain so for a long time to come. You can see this yourself in the photograph below!

Kitchen tiles after cleaning and grout recolour in Warrington

 
 
Source: Tile and Grout Cleaning and Restoration Service in West Cheshire

Protecting Grout on a Ceramic Tiled Kitchen Worktop

Following a referral from customer which is always nice to have, we paid a visit to a house in Brighton where the owner was having difficulty keeping their ceramic tiled kitchen worktop clean. As you can see from the photograph below the glazed ceramic tiles were in reasonable condition, it was the grout that was the problem; this is not unusual as glazer ceramics are very hard wearing but the top layer of grout is in fact porous and will trap dirt and become discoloured if not sealed.

Kitchen Tiled Worktop in Brighton Before Cleaning

Grout Cleaning

There were two ways this job could have been tackled, the first being to remove the top layer or grout using the flat blade of a screwdriver and then re-grout. It was a reasonably large area of worktop so this would have taken some time. The second and simpler option is to use a heavy duty tile and grout cleaning product such as Tile Doctor Pro-Clean and that is exactly what we did, it also has the added advantage of cleaning the tiles at the same time.

The Pro-Clean was diluted with water and then left to dwell on the tile and grout for about ten minutes before being scrubbed in by hand with a stiff brush. For the wall tiles the solution was decanted to a spray bottle and sprayed onto the tiles, the combination with air makes it lighter and more able to stick to a vertical surface.

The tiles were then washed down with water and any stubborn areas re-treated with more Pro-Clean and elbow grease, it wasn’t long before the tile and grout was looking like new again.

Sealing Grout

Now glazed Ceramic tiles don’t need to be sealed as the glaze provides an effective barrier however as I mentioned before the top layer of grout is porous and will attract dirt over time and should be sealed, especially considering kitchen worktops are used to prepare food. Tile Doctor have a range of sealing products any of which will seal grout however in this case I used Grout Seal and Go which comes in a spray bottle.

Kitchen Tiled Worktop in Brighton After Cleaning

 
 
Source: Cleaning ceramic tiles and grout in Brighton

Deep Cleaning Porcelain Tile and Grout Lines

This Porcelain hallway and kitchen floor in Teddington, Middlesex, had extensive soiling in the grout lines and some staining on some of the Porcelain tiles from drink spillages. Porcelain is very robust material but like any surface the sooner you clean-up a spillage the less staining you are likely to experience.

Porcelain Tile and Grout Before Cleaning

Cleaning Porcelain Tile and Grout

To clean the tile and grout I applied a dilution of Tile Doctor Pro-Clean, which is an effective Tile and Grout cleaner, with a mop and left it to soak in for a while before working it into the floor using a rotary machine fitted with a black scrubbing pad and a stiff brush along the grout lines. The soiled cleaning solution was removed using a wet vacuum and rinsed down with clean water. This process was repeated until I was satisfied the tile and grout was clean.

I then waited for the floor to dry before applying a coat of Tile Doctor Grout Sealer to the grout lines in order to help make future maintenance easier, this type of Porcelain did not need sealing so only the grout would benefit from this preventative measure. The process is very straightforward and can be sprayed onto the grout line wiping off the excess from the adjacent tile within a few minutes.

Porcelain and Grout After Cleaning

I think you will agree from the photographs that the grout which was very prominent has now almost disappeared restoring the floor to its original appearance.
 
 
Source: Deep cleaning Porecelain and Tile Grout in Middlesex

Soot damaged Grout cleaned and re-coloured in Warlingham

This job was completed to resolve an Insurance claim for a lady who lives in Warlingham whose bathroom tiles and grout had been damaged from smoke and soot. A building company had attempted to clean the tiles however the lady was not satisfied and told the insurance company it was to be done properly. On inspection the grout was still a bit dirty but I told her it was possible to clean it up, but could not guarantee it would be a uniform finish. I suggested that she could have the grout re-coloured at the same cost and gave her a small demonstration, she was happy with this and contacted the insurance company to get the go ahead; a week later she called me to book it in.

Ceramic Tile and Grout Before Ceramic Tile and Grout Before

Preparing the Tile and Grout for Re-colouring

When I started the job I went over it with the lady to make sure she was happy with the colour and if there were any other issues. She pointed out that on the border tiles had discoloured and on closer inspection I found that they were a marble tile and the builders had put a topcoat seal on them to make them shiny but because it was the wrong type of seal and it had started to peel.

As a result it was necessary to the sealer as so I put a coat of remove and go on the border tiles and left it to dwell; I also sprayed a solution of Tile Doctor Pro-Clean onto the ceramic wall tiles and scrubbed the tiles and grout before washing then down with warm water. By this time I could then scrub the border tiles in order to remove the old topcoat sealer. I dried the border tiles using my heat gun and the applied a coat of Ultra-Seal; the marble tiles had to be sealed before I could colour the grout.

Applying Grout Colourant

Once everything had been rinsed and the grout had dried I was able to apply the grout colourant using my colour applicator (toothbrush). Its meticulous work so it took a couple of hours to apply and by then I could go round to remove any excess colourant by spraying plain water and scrubbing with a white pad. I use a white pad, because if I used a coloured pad I could transfer the dye from the coloured pad to the seal.

Ceramic Tile and Grout After Ceramic Tile and Grout After

Once I had completed the whole room I checked to make sure everything was okay and found I needed to touch up a couple of areas. I then buffed all the tiles up and cleaned the bath, sink and floor and asked the lady to check it all before putting all my equipment and dust sheets back into the van. The lady was really happy with the result (see comment below) and has asked me to do the same work in her kitchen.

Bill worked continually throughout the day without a break. He was very polite and courteous He was full of knowledge and yes I would use again.

Kim Dehnert, Wallingham

 
 
Source: Soot damaged Grout Re-Coloured