Refreshing the Grout in a Ceramic Shower Cubicle

Many homeowners will be able to relate to this post about tiled shower cubicles which can become mouldy, grubby, and just plainly unappealing to look at. The reality is that dirt, mould, and stains can be quite easily removed with the right products if addressed on a regular basis. However, many busy homeowners simply don’t have the time, and subsequently the mould problems gradually worsen over time. This is what had happened at this property in Ramsbottom (a town known for its annual Chocolate Festival) – the customer’s Ceramic tiled shower cubicle had not been adequately cleaned in a long time, resulting in severe staining that would prove impossible to remove entirely.

Deep Cleaning a Shower Cubicle In Ramsbottom Before

When the customer contacted me after finding Tile Doctor over the internet, I suggested that I could provide the grout with the best clean possible before re-colouring the grout with a white Grout Colourant to hide the staining and it back to looking similar to its original condition. The customer agreed that this would be the best course of action, and booked me in to complete the work.

Deep Cleaning a Shower Cubicle In Ramsbottom Before

Cleaning Ceramic Tiled Shower Cubicle Grout

The first step in the restoration was to get the grout ready for the new Grout Colourant to be applied. This involved cleaning the grout with Tile Doctor Pre-Treat Cleaner, which successfully removed the various dirt, soil, soap scum and hard water deposits that had built up after plenty of exposure to acidic shampoos and soaps. Getting the grout joints clean allows the colourant to form a better bond with the grout.

The Pre-Treat Cleaner was sprayed onto the grout and left to dwell for roughly five minutes before being agitated with a grout brush. Next, I rinsed the grout with water and removed the old and mouldy silicone around the shower cubicle.

Colouring Grout and Siliconing for a Ceramic Tiled Shower Cubicle

After running tests I discovered a few damp issues, but these were quickly resolved with the help of my heat gun. With the grout now ready to be coloured, I applied two coats of Tile Doctor’s white Grout Colourant, allowing the first coat to dry before applying the second.

Deep Cleaning a Shower Cubicle In Ramsbottom After

The Grout Colourant is an epoxy-based product that seals and rejuvenates the grout, protecting it against future staining and making it easy to clean in the future. After completing the grout colouring I cleaned up the area – including removing any excess product – and then applied fresh silicone in a matching white around the base of the shower cubicle.

Deep Cleaning a Shower Cubicle In Ramsbottom After

As you can see from the photographs, the appearance of the shower cubicle was transformed by the new Colourant. My customer even left the following comment on the Tile Doctor feedback system:

“Tony was polite punctual and efficient. We are very happy with his work!”
 
 
Source: Shower Tile Grout Cleaning and Colouring Service in Derbyshire

Deep Cleaning and Sealing Grout

This customer from Rushden called me in because she was having difficulty keeping the grout in her kitchen clean although the ceramic tiles themselves were fairly easy to maintain.

On speaking to the customer it became evident that the one coat of sealant that was originally applied to the grout five years ago had all but worn off and the cleaning products she was using were too strong reducing the life of the sealer and now dirty water getting into the now porous grout which was causing staining each time she mopped the floor.

Cleaning Grout Ceramic Tiles in Rushden Before

I gave the customer a quote for deep cleaning and extraction of tiles and grout lines, as they were thinking of selling the house they didn’t want to have the expense of re-colouring the grout. We decided the best course of action would be re-sealing the grout with Tile Doctor Grout Seal & Go after cleaning and this should protect it going forward.

Deep Cleaning Ceramic Tile and Grout

To get the grout clean and lift out the dirt we used Tile Doctor Pro-Clean mopped onto the floor and scrubbed into the grout lines with a stiff grout brush. The second and third pictures below show the equipment we use to deep clean and scrub the grout and to extract the water under pressure to clean the grout as best as possible.

Cleaning Grout Ceramic Tiles in Rushden During Cleaning Grout Ceramic Tiles in Rushden During

Sealing Grout

The final pictures below show the overall end result after allowing the floor to drying overnight and then sealing the grout with two coats of Tile Doctor Grout Seal & Go.

Cleaning Grout Ceramic Tiles in Rushden After Cleaning Grout Ceramic Tiles in Rushden After

I also talked the customer through Tile Doctor recommended cleaning procedures and advised her that she was entitled to a free bottle of Tile Doctor Neutral Cleaner which would keep the floor looking at its best for much longer and would not affect the grout sealant.
 
 
Source: Professional Tile, Stone and Grout maintenance service in Northamptonshire

Dealing with Darkened Grout

This was a straight forward Grout Colouring job at a house in the market town of Tamworth, Staffordshire. The tiles had been installed with a white grout and over the years the grout had become darker as the dirt had become ingrained into the porous top layer. This is often the case with Porcelain and Ceramic tiles whose looks always outlive that of the grout.

Grout Colour Before Tamworth Grout Colour Before Tamworth

Cleaning and Colouring Grout

The customer was keen to get the grouting looking the same as it was when first installed and so with that aim in mind a dilution of Tile Doctor Pro-Clean was applied and scrubbed into the grout lines and then washed off with water. Pro-Clean is a strong alkaline cleaning product that does a good job cleaning up grout however it can only do so much and in this case although it made a difference there were many areas which were too stained.

The next step was to apply a grout colouring product, they come in a number of different colours and the best match to the original colour was Ivory. The Pro-Clean had already prepared the surface so no need to use a pre-treater, it was just a question of waiting for the grout to dry and then apply the colourant.

Applying grout colourant is fiddly work but you do get the pleasure of watching the floor become slowly transformed, also the colourant works as a sealant which will prevent staining and make the grout very easy to clean going forward.

Grout Colour After Tamworth Grout Colour After Tamworth

As you can see the floor looks like new and the customer was very happy.
 
 
Source: Tile, Stone and Grout Maintenance Service in Staffordshire

Grout Colouring Wall Tiles

I recently paid a visit to a customer at a house in the town of Preston to restore the colour of the grout in their bathroom which due to years of using strong cleaning products had bleached the grout of any colour. The tiles themselves were not the issue they seemed fine but the grout was looking Tired; we discussed the options and decided the best course of action would be to apply a grout colourant. Two different colours were chosen, white for the shower area and Sandstone for the toilet area.

WC Grout Colouring in Preston Before Shower Cubicle Grout Colouring in Preston Before

Colouring Wall Grout

Before applying the grout colourant it’s important to give the grout a deep clean using the Pre-Treater that comes with the kit; the solution is sprayed on and scrubbed in by hand before being rinsed off with water.

Once the grout had dried I started to apply the Grout colour which restores the colour and seals the grout as well, thus making it easier to clean afterwards. Grout colouring is fiddly work but you do get the gratification of an instant change. Once done I called the customer in who was delighted with the new effect as Grout colour if used correctly looks very natural and not as if someone has painted the grout making it look false.

WC Grout Colouring in Preston After Shower Cubicle Grout Colouring in Preston After

We discussed using the correct type of cleaning product for aftercare as this seemed to be the issue to start with and I recommended Tile Doctor Aqua-Pro as this can be sprayed onto the Tiles and mopped off which is ideal where a small amount of water is required. For regular cleaning Tile Doctor Neutral cleaner was also mentioned as this is diluted into water where more cleaning is needed and mopped onto the floor area.
 
 
Source: Grout Colouring Service in Lancashire

Tired Shower Grout Refresh

Keeping the tile and grout in shower cubicles clean is often a headache for homeowners and this cubicle at a house in Edinburgh was certainly no different. You can see from the photograph below that although the glazed ceramic tiles were in good condition they were being made to look grubby by the stained condition of the adjacent grout and there were also signs of mould build-up. If you catch this early you can overcome the problem spraying on a product called Tile Doctor Mould-Away however in this case a full refresh was required.

Shower Renovation Before Cleaning

Cleaning Ceramic Tile and Grout

We started by spraying the tile and grout down with Tile Doctor which is a strong alkaline cleaner Pro-Clean, spraying it on mixes it with helping it to stick to Vertical surfaces where it can get to work on the dirt. We left it to dwell for ten minutes before scrubbing it in by hand using a stiff grout brush; this process certainly improved the grout but unfortunately it had become too badly stained to be satisfactory so it was agreed with the owner that we would recolour the grout using a white grout colourant.

Recolouring Grout

The grout colourant comes in a tube and is very straightforward to apply although I must admit the work is quite tedious. Two coats of white colourant were required to get the uniform appearance needed and I think you will agree the effect is quite transforming. The other advantage of these particular colourant products is that they are epoxy based and form a barrier of the grout preventing future staining and making it very easy to clean going forward.

Shower Renovation After Cleaning

The last step was to carefully remove the existing silicon strip along the base of the cubicle with a sharp nice and replace with new. The final result was a shower cubicle that looked recently installed.
 
 
Source: Tile, Stone and Grout Cleaning and Sealing in Edinburgh

Cleaning Kitchen Floor Tile and Grout

We received a call to visit a house in Chorley where the grout in the kitchen tiles had gone black with the build-up of dirt and the owner was having trouble cleaning it. Porcelain and Ceramic tiles are a great choice for kitchens as they are very easy to clean however what most people don’t realise is that the top layer of grout is actually porous and can becomes stained with dirt. With the agreement of the home owner I did a test clean using a strong cleaning product called Tile Doctor Remove and Go leaving it to dwell on the tile and grout before scrubbing it in by hand and then washing off the soiled solution; you can see from the photograph below that the tile and grout cleaned up nicely so I was booked to do the job the following week.

Chorley Tile and Grout Cleaning Test

Cleaning Tile and Grout

On my return I repeated the earlier process on the whole floor cleaning the grout with Remove and Go and working it in along the grout lines with a stiff grout brush making sure to thoroughly scrub every grout joint working in small sections at a time.

Chorley Tile and Grout Before Cleaning

Once I was happy with the grout in a section the floor would be rinsed off with clean water and a wet vacuum was used to remove the dirty water. I did this all over the floor until all the grout joints were clean retreating areas that needed extra attention.

Chorley Tile and Grout During Cleaning

The next step was to give the ceramic tiles a good clean by applying a strong general Tile and Grout cleaning product called Tile Doctor Pro-Clean. The solution was scrubbed onto the floor and left to dwell for ten minutes scrubbed some more and then rinsed off. The floor was then washed down with clean water three times to make sure all the cleaning products had been removed and then dried with a wet vacuum. I then left the floor to completely dry for a couple of hours and came back later to check all the grout joints were clean and followed up with a bit of detail work on corners and edges rinsing the floor again when I had finished.

Chorley Tile and Grout After Cleaning

I managed to complete the job in a day and with all the cleaning the tile and grout came up much lighter than before making it look like a new floor had been installed. The customer was really happy with the final result and left the following feedback on the Tile Doctor feedback system.

Heidi cleaned a very dirty tiled floor back to its original state and it now looks superb. She was extremely professional and courteous but just as important she didn’t leave a mess like a lot of tradesmen do!!! I would have no hesitation in recommending Heidi to any of my friends to carry out similar work. A job well done!!!
Chris Palmer, Chorley

Chorley Tile and Grout Before and After Cleaning

 
 
Source: Residential and Commercial Tile Cleaning in Lancashire

Colouring Grout in Lancashire

A customer in Leyland near Preston reported a grouting issue with their porcelain tiled kitchen floor, the tiles were fine but the grout had become discoloured and grey, they were also finding it difficult to keep clean. This is not an unusual story for Porcelain or Ceramic tiled floors which are generally very low maintenance and you find the grout needs attention before the tiles do.

Grout Colouring in Leyland Before

Applying Grout Colourant

On arrival I set up my equipment and cleaned the floor to make sure all the grout joints were free from any dirt etc., I then did a colour test on a less obvious part of the floor with the grout colour. I wanted to make sure the colourant would take to the grout and also to make sure the customer was happy with her colour choice.

The process for grout colouring is fairly tedious but straightforward, it involves giving the bottle a good shake and applying a small amount to a toothbrush and working the grout colorant into joints using a back-and-forth motion. I find the best way to apply it is by working in small areas and adding thin even coats to limit the amount of grout colorant that gets on the tile. They were large format tiles covering 9m2 so I only needed one bottle of buff grout colourant to do the entire floor.

After the Grout Colorant dries (it takes between twenty and sixty minutes depending on how warm the house) you mist the surface with water and let stand for five minutes, excess grout colorant is then removed from the tile surface using a white nylon scrub pad.

Grout Colouring in Leyland During

The floor was ready for surface traffic in 2 hours but there was a white mist over the floor which you can get with porcelain tiles so I fitted a white buffing pad to my rotary floor polishing machine and buffed the floor to remove the power and water marks, once finished the floor looked like new. Before leaving I left the customer with some after care instructions and how to keep it floor looking good for the future.

Grout Colouring in Leyland After

 
 
Source: Making Grout look new again in Lancashire

Lancashire Grout Colouring

The surface of grout is porous and as a result it can get so dirty it becomes impossible to clean it successfully, even our most powerful cleaners struggle if it gets to this stage. If you get to this point you could use the flat end of a screwdriver to scrape out the grout and re-grout the whole floor to ensure a consistent colour, naturally this is arduous work and can be time consuming however there is a second option and that is to apply a Grout Colourant instead. The grout colouring products we use not only change the colour but it also provides a protective barrier that seals the grout as well ensuring it keeps it appearance well into the future.

Grout Colouring Before

Preparing the Grout

Before applying a Grout Colour it’s important to ensure the grout is clean of grease and any sealer that may have been applied to the adjacent tile; Tile Doctor Pro-Clean is a strong alkaline cleaner that’s good for this purpose, for best results you should allow the cleaner to dwell for a while and then get into the grout joints by hand with a stiff brush. Last step is to rinse the floor down with clean water to remove any chemical that might upset the colourant, I recommend the use of a wet vacuum at this point to remove liquids from the floor.

Grout Colouring During

Applying the Grout Colour

Once the grout has dried you can start applying the colourant which is a relatively straightforward process of squeezing the product onto a toothbrush and running it onto the grout. Don’t be tempted to use an old toothbrush for this purpose as it may contaminate the colourant leading to discolouration in the finish. The product sets in a couple of hours so I was able to do the whole floor in a day.

Grout Colouring After

 
 
Source: Grout Colouring in Chorley, Lancashire