Shower Cubicle Grout Refresh

The photographs below were taken at a private residence in the town of Stafford, the owner of the house was unhappy with the state of the grout lines in their ceramic tiled shower which had, over time, had become grey and stained. As you cans see from the photograph, the whole area in general was very tired looking. I recommended a grout clean, colouring and seal to get the shower back to looking its best. My client was happy with me to proceed and I promptly began the work.

Grout Colouring Ceramic shower tiled cubicle in stafford before

Grout Colouring including Prep

My first task was to clean the grout using a grout colouring pre-treater which cleans and prepares the grout joints to make a better bond with the colourant. The tiles were then given a rinse and dried before I stripped out the old sealant strip between the tiles and shower tray.

My next task was to carefully apply a white Grout Colourant along the grout lines using an applicator brush. The colourant is basically painted onto the grout and any excess is wiped off the adjacent tile before it dries. The colourant, which is available in a range of shades, is an epoxy based product that both recolours and seals the grout lines to provide protection against dirt and stains.

To finish off the job I applied fresh sealant between the shower tray and bottom row of tiles in a matching white. The whole shower took on a much fresher appearance after I finished and looked transformed.

Grout Colouring Ceramic shower tiled cubicle in stafford after

My client contacted me two weeks after I completed the job to happily inform me that my work had actually solved a leakage problem that have been affecting the shower cubicle. With the addition of a robust clean, colouring and seal, my client was very pleased with the results.
 
 
Source: Professional Tile, Stone and Grout cleaning and maintenance services in Staffordshire

One thought on “Shower Cubicle Grout Refresh

Comments are closed.