Skip to content

Renovating Mouldly Bathroom Grout in Oxford

    Click here to get this post as a PDF

    Our clients contacted us in despair with their bathroom. The request was to renovate their ceramic tiled bathroom at a house in Oxford, a beautiful location, as most will know the city is known worldwide as the home of the University of Oxford, which is in fact the oldest university in the English-speaking world, also known as the “city of dreaming spires”. They had tried many supermarket solutions to clean up the grout and sort out the silicone trim, to no avail. The ceramic tiles were in good condition so the specific focus for the client was on treating the dirty grout and silicone trim around the bath.

    Bathroom Before Grout Clean and Silicone Replaced Oxford

    The grout has gone black with mould in some places and this is a very common problem in UK bathrooms where it thrives in the warm damp conditions and is usually related to a lack of ventilation. The simple action of leaving a window and door ajar after having a shower helps to cross ventilate and can reduce the problem. Of course, this is not always desirable during cold weather so improved mechanical extraction is always better. Another option is to run the shower cold for a few minutes afterwards, in fact some modern showers have this feature built in for that purpose. I discussed the causes with the client, we agreed a quote and arranged a day to complete the work.

    Cleaning and Grouting Ceramic Tiled Bathroom in Oxford

    I started by spraying the grout with Tile Doctor Duo-Clean, this is a fast and effective double action grout cleaner and mould remover. It cleans up grout and can remove mould and blackspot from grout and silicone and is suitable for use on plastic and enamel baths and showers. I left this to soak in for about 30 minutes, and then worked in sections spraying more Duo-Clean and scrubbing with a grout brush and rinsing each section with water. After cleaning the whole bathroom, I left it for an hour so that the grout had dried. I could then see if there were any places needing a second clean, in this case there were a few stubborn areas and so the process was repeated. Once I was satisfied I had fully cleaned the grout and tiles I took a break and left the bathroom so that the grout would completely dry out. At this stage the tile and grout were already looking much better.

    Resealing Ceramic Tiled Bathroom in Oxford

    After lunch I carefully removed all the silicone between the bath, sink and the wall tiles with a sharp knife. This is a little time consuming, but it is important to remove all of the old sealant in order to achieve the best finish. This was then cleaned up and then fresh mould resistant silicone put back in its place. This ensures everything is water tight

    For aftercare we recommend the regular application of Tile Doctor Oxy-Pro, this is a powerful alkaline product especially formulated for cleaning shower Tile and Grout. It’s a highly effective cleaner that removes soap scum, body oil, mildew and algae from areas that have been neglected or subjected to frequent use. This will keep on top of the problem and ensure the bathroom continues to look nice and clean.

    Bathroom After Grout Clean and Silicone Replaced Oxford

    The client was very happy with the result which was completed in one day. The bathroom was certainly left looking very fresh, clean and much more appealing.

     

    Source: Ceramic Tile Cleaning and Renovation Service in Oxfordshire