Skip to content

Protecting Shower Grout with a Grout Colourant

    Click here to get this post as a PDF

    When renting property out a property it makes a lot of sense to give it a quick facelift to ensure it’s more attractive to future tenants, not only will it rent faster but it should also command a better price. Many landlords don’t realise this but giving bathrooms, a facelift is the one thing you can do quite cheaply and quickly that can rapidly improve the appearance and desirability of a house, after all no-one wants to rent a place with grotty tiles!

    A returning customer of mine recently contacted me about restoring the condition of a Ceramic tiled shower cubicle in a flat she owned in the Surrey village of Oxshott. She was about to rent the property out to a couple of international students, and so wanted it looking its best in all aspects.

    Tiled Shower Before Renovation in Oxshot

    You may be wondering why international students would want to live in Oxshott but it’s not too far at all from the University of Surrey. The town of Oxshott is quite large and has a low population density. There are many private roads in the village – and it has been named the “most expensive village in England” and so a very desirable location.

    Cleaning a Ceramic Tiled Shower Cubicle

    We tend to follow a tried and tested method that we have developed at Tile Doctor for restoring shower cubicles. To begin, I cleaned the grout lines using our acidic cleaning product, Tile Doctor Clean-Up. The product was scrubbed into shower wall tile and grout using a handheld rotary machine fitted with a six-inch black scrubbing pad.

    Being a concentrated phosphoric acid cleaner, Grout Clean-Up effectively removes mineral deposits (salts etc) and grout smears from the tile surface to leaving it looking much fresher, it also prepares the grout for a superior bond with the grout colourant that was to be added later.

    Following this, I scrubbed the tiles down with Tile Doctor Pro-Clean to provide a general clean and to remove any other muck and dirt. This was followed by a rinse with water to remove any trace of cleaning product from the tile and grout. The next step was to remove all the existing silicone mastic with a sharp knife; the mastic sealant stained with mould and much in need of replacement. Once all the rubbish was swept out, I dried any remaining dampness from the grout and tiles with a heat gun.

    Grout Colouring a Ceramic Tiled Shower Cubicle

    This left the grout ready to be recoloured. I did this over the course of a few hours, using a White colourant from the Tile Doctor Grout Colourant range. White is just one of ten colours available in the range and was chosen in this case to give the grout a really fresh look and to blend in with the White Ceramic tiles.

    The application of Grout Colourant not only colours the grout joints – it also seals and rejuvenates them. It also dries quickly, so I could apply a second coat quite soon after the first, removing any excess as I went.

    Once the restoration was finished, I resealed the shower base with fresh silicone mastic again in White to match the tile and grout. As a courtesy, I also cleaned the shower glass too, leaving an excellent result overall – and one very happy customer!

    Tiled Shower After Renovation in Oxshot

     
     
    Source: Ceramic Tile Cleaning and Restoration Service in Surrey