Removing Grout Smears from a Porcelain Tiled Bathroom in Hertfordshire

A builder in Stevenage contacted us about cleaning up a Grout Haze problem in a bathroom that they had recently tiled. Ideally grout should be polished off the tile after installation as getting grout off the surface of tiles once it has dried can be difficult. It’s actually a common problem often referred to as Grout Haze or Grout Smears that ruins the look of the tile. To remove it you need to use an acidic product, but acids can cause damage, so you need to be careful. In fact, my customer had read several horror stories on-line where brick acid and other strong chemicals had been used to clean up tiles so had decided to call us in and have it done professionally rather than attempt to do it themselves.

Black Porcelain Bathroom Floor Before Cleaning Stevenage Black Porcelain Bathroom Floor Before Cleaning Stevenage

The tiling work had been carried out in the ensuite of a house in Stevenage as part of larger renovation project they were involved in and being a Black porcelain tile the grout smears were very obvious as you can see form the photographs on this page.

Cleaning a Porcelain Tiled Ensuite Floor

To remove the grout smears we used Tile Doctor Grout Clean-Up which is an acidic product available from Tile Doctor which penetrates beneath the surface and was specifically created for the removal of grout smears. It can also be used to remove efflorescence which are those white salt deposits that you often see on brickwork. We have used this product on numerous occasions on many different tile installations, so we were confident it would work well on the black porcelain.

We began by applying Tile Doctor Grout Clean-Up to the tiles with a sponge and then scrubbing it into each individual tile as we went. The tiles are then rinsed with water, inspected and cleaned again if required. I should mention that being an acid-based product, it is advisable to wear rubber gloves and eye protection and ensure any areas not requiring treatment are well covered and protected.

Black Porcelain Bathroom Floor During Cleaning Stevenage Black Porcelain Bathroom Floor During Cleaning Stevenage

Once done a second rinse was carried out and the resulting residue was removed with a wet vacuum before leaving the tiles to dry off.

This process was carried out throughout the bathroom and to both the floor and wall tiles. The room was quite large, so the job took most of the day to complete, working methodically around each area. Once the areas were dry, you could see that the grout haze was no longer there.

Black Porcelain Bathroom Floor After Cleaning Stevenage Black Porcelain Bathroom Floor After Cleaning Stevenage

The room was soon left looking much more presentable for the new owners who I’m sure would not have been impressed with the way it looked before. The builders were grateful that we had been able to get the tiles looking pristine and the room looking as good as new. Before leaving we discussed with them the best course of action on future projects to avoid the same problem and recommended the use of Tile Doctor Aqua-Pro as a general maintenance cleaner.

 

Source: Porcelain Tile Cleaning and Renovation Service in Hertfordshire

Colouring Stained Grout to Natural Grey in Kidderminster

I visited this property on the outskirts of Kidderminster which had Porcelain tiles laid throughout the downstairs. The owner was happy with the tiles but unhappy with the grout which had become stained. This is not unusual as Porcelain tiles are very resilient but the cementous top layer of grout is slightly porous and can attract dirt. As a result, the grout can become discoloured over time and if it becomes very stained no amount of cleaning will bring the grout back to its original colour.

Large Porcelain Floor Before Grout Colouring Kidderminster

After a careful inspection we both concluded that the best way forward would be to apply a Tile Doctor Grout Colourant in a darker colour to make maintenance easier in the future and give the whole floor a much needed, face lift. My quote was accepted, and the work scheduled.

The work would take four days to complete as there was 60 square metres of tiles where the grout needed to be recoloured, also some areas of grout needed replacing where the grout had perished.

Renovating Grout on a Porcelain Tiled Downstairs Floor

After re-grouting the areas where the grout had crumbled, I began to prepare the grout lines with the application of a Tile Doctor Grout Colouring Pre-Treater which is scrubbed into the grout lines and sponged away, the pre-treater cleans and etches the grout, so the colourant achieves a stronger bond.

To speed dry the grout I used a heat gun, so I could get on with the application of the grout colourant. It was a large floor, so I needed five tubes of 237ml Natural Grey Grout Colourant which was applied in stages so to minimise disruption to the owner. It’s very easy to apply, the trick is to make sure you wipe off any excess that gets on the tile before it dries.

The floor was then buffed with a white buffing pad to bring up the appearance.

Once completed the owner was extremely happy that the floor had been given a completely new look and looked as good as the day it was installed. The colourant will also form a barrier over the grout which will prevent staining in future and make it easier to clean.

Large Porcelain Floor After Grout Colouring Kidderminster

The customer was very pleased and left this review.

“I could not find anyone locally to carry out the work on the discoloured grout on my floor tiles – they were ruining the look of my new kitchen – so finding the Tile Doctor was a real godsend. Mark came promptly and was very reassuring – the work was done quickly and efficiently, and the finished result was amazing – I love my tiles again! Mark was pleasant and helpful – nothing was too much trouble and it was a pleasure to have him working in the house – he also gave me some good advice as to how to keep the tiles looking their best. Thanks to him an experience I had dreaded turned in to a very positive one – so a big thank you to Mark and the Tile Doctor – I would recommend you to anyone who has a problem with their tiles.
Mrs F, Kidderminster 19 July 2018”

 

Source: Grout Cleaning and Colouring Service in Kidderminster, Worcestershire

Refreshing Stained Shower Grout in Chapel-en-le-Frith

This client lives in Chapel-en-le-Frith which is a small town dubbed the ‘Capital of the Peak’ with parts of the parish lying in the Peak District National Park. They were trying to sell the house, but the shower cubicle was looking very bad and all the potential purchasers were being put off. They wanted to restore a new and fresh look, without spending a fortune, so they could finally sell it and move to their new property. With this in mind they had given me a call to come and take a look and see what could be done.

As you can see from the photos the grout was very badly discoloured in places, so I agreed with the client that the best course of action would be to clean the grout as much as possible and then recolour it with a white Grout Colourant followed by stripping off the old silicone and replacing with new. We discussed the cost and a timescale and booked the job in.

Shower Cubicle Before Cleaning Chapel-en-le-Frith

Shower Cubicle Tile Cleaning

The Tile Doctor Grout Colourant Kit comes with everything you need to change the colour of your grout including a Pre-Treat cleaner which is a slightly acidic product that cleans and etches your grout at the same time. This means you can get a better bond with the colourant when it is applied afterwards and ensures the best finish.

I set about cleaning the grout with the pre-treat cleaner which is sprayed on to the tile and then scrubbed in with an abrasive pad. This was then rinsed off with water and re-applied where necessary, some areas were worse than others and needed more work, so I persevered until I was happy the grout was as clean as it could be.

Applying White Grout Colourant

The job could be completed in one day, so the next job was to remove the silicone sealant between the tiles and the shower tray, the sealant was black with mould and dirt and generally in very bad condition.

Once the grout had dried I was able to start the application of the grout colourant using a small brush, wiping any excess off the tiles as I went. A steady hand is required for this job along with a little patience! Two coats of colourant were required to achieve the right finish.

Finally, the last step to complete was to put back a new white silicone sealant using a high-quality mould resistant product. There are many on the market, but the cheaper brands are not usually mould resistant and tend to turn black very quickly. Applying the sealant ensures the shower is waterproof and no water can get behind the tiles.

Shower Cubicle After Cleaning Chapel-en-le-Frith

The shower cubicle had a new look and my client was really surprised about the end result. They now felt more confident that potential purchasers wouldn’t be put off by a grubby looking bathroom. Thankfully it had not cost them too much to make it look a whole lot more appealing.

Shower Cubicle After Cleaning Chapel-en-le-Frith

 

Source: Professional Clean and Re Grout of a Shower Cubicle in Derbyshire

Changing White Grout to Natural Grey in Glossop, Derbyshire

The tiled floor shown in the photographs below are from a client who lives in Glossop which is a market town in the Derbyshire Peak District between Manchester and Sheffield. I was contacted me to see if it would be possible to recolour the grout, it turns out they had been a little disappointed with the white grout colour they had chosen and preferred the more defined look a darker grout would have given.

I went to survey the floor and could see the tiles were Porcelain which are a good choice for busy common areas as they are very tough, easily cleaned and usually don’t need to be sealed. Grout however is cementous and the top layer is porous which can allows it to be easily stained, a problem which is more evident on white grout which is therefore not the best choice for a kitchen.

Porcelain Tiled Floor Grout Before Colouring Glossop

The tiled floor area was approximately 25 square meters, but big tiles and thin grout lines would make this a reasonably quick job to complete. We agreed a cost and I arranged a date, the job would be done across two days to allow the grout time to dry after deep cleaning on day one.

Cleaning Porcelain Tiled Floor Grout

To get the best results and achieve a superior bond between with the colourant it was important to get the grout as clean as it could be. To this end I gave the grout a good scrub with a strong dilution of Tile Doctor Pro-Clean which is a stripper and degreaser that is safe to use on tile and grout and great for removing dirt from heavily soiled stone or grout.

Floor scrubbing machines can struggle to reach into the grout recess, so I find the best way to clean grout is by hand using a soft steel brush. This action cleaned up the grout well and the now soiled Pro-Clean was rinsed off the floor with clean water and then extracted with a wet vacuum. I then inspected the floor to make sure I was happy and re-treated a few areas that needed more work.

I wanted the grout to be bone dry before applying the grout colourant so after cleaning the grout I left and agreed to come back the next day to complete the job.

Grout Colouring a Porcelain Tiled Floor

When I arrived in the morning I could see the grout was fully dry and ready to be recoloured. Because I needed to recolour from white to natural grey I only needed one thick coat of Natural Grey grout colourant which was carefully applied with a small brush and any excess wiped off the tile as I went along. In fact, even after retouching I found that with such narrow grout lines and large format tiles I only used half a bottle of natural grey colourant to complete the job.

Porcelain Tiled Floor Grout After Colouring Glossop

The job was all complete and the floor looking completely different. The client was over the moon with the finish and we had achieved exactly what they were looking for. The grout colourant also forms a barrier over the grout sealing it in and so they will find this floor is very easy to keep cleaning going forward.

 

Source: Grout Cleaning and Colouring Service in Glossop, Derbyshire

Renovating Mouldly Bathroom Grout in Oxford

Our clients contacted us in despair with their bathroom. The request was to renovate their ceramic tiled bathroom at a house in Oxford, a beautiful location, as most will know the city is known worldwide as the home of the University of Oxford, which is in fact the oldest university in the English-speaking world, also known as the “city of dreaming spires”. They had tried many supermarket solutions to clean up the grout and sort out the silicone trim, to no avail. The ceramic tiles were in good condition so the specific focus for the client was on treating the dirty grout and silicone trim around the bath.

Bathroom Before Grout Clean and Silicone Replaced Oxford

The grout has gone black with mould in some places and this is a very common problem in UK bathrooms where it thrives in the warm damp conditions and is usually related to a lack of ventilation. The simple action of leaving a window and door ajar after having a shower helps to cross ventilate and can reduce the problem. Of course, this is not always desirable during cold weather so improved mechanical extraction is always better. Another option is to run the shower cold for a few minutes afterwards, in fact some modern showers have this feature built in for that purpose. I discussed the causes with the client, we agreed a quote and arranged a day to complete the work.

Cleaning and Grouting Ceramic Tiled Bathroom in Oxford

I started by spraying the grout with Tile Doctor Duo-Clean, this is a fast and effective double action grout cleaner and mould remover. It cleans up grout and can remove mould and blackspot from grout and silicone and is suitable for use on plastic and enamel baths and showers. I left this to soak in for about 30 minutes, and then worked in sections spraying more Duo-Clean and scrubbing with a grout brush and rinsing each section with water. After cleaning the whole bathroom, I left it for an hour so that the grout had dried. I could then see if there were any places needing a second clean, in this case there were a few stubborn areas and so the process was repeated. Once I was satisfied I had fully cleaned the grout and tiles I took a break and left the bathroom so that the grout would completely dry out. At this stage the tile and grout were already looking much better.

Resealing Ceramic Tiled Bathroom in Oxford

After lunch I carefully removed all the silicone between the bath, sink and the wall tiles with a sharp knife. This is a little time consuming, but it is important to remove all of the old sealant in order to achieve the best finish. This was then cleaned up and then fresh mould resistant silicone put back in its place. This ensures everything is water tight

For aftercare we recommend the regular application of Tile Doctor Oxy-Pro, this is a powerful alkaline product especially formulated for cleaning shower Tile and Grout. It’s a highly effective cleaner that removes soap scum, body oil, mildew and algae from areas that have been neglected or subjected to frequent use. This will keep on top of the problem and ensure the bathroom continues to look nice and clean.

Bathroom After Grout Clean and Silicone Replaced Oxford

The client was very happy with the result which was completed in one day. The bathroom was certainly left looking very fresh, clean and much more appealing.

 

Source: Ceramic Tile Cleaning and Renovation Service in Oxfordshire

Dirty Terracotta Floor Tiles and Grout Cleaned in Buckinghamshire

The Terracotta tiled kitchen floor in the kitchen house of this house in the residential district of Great Holm, just outside of Milton Keynes had been laid some time ago and was now well worn and dirty. The houses in the area are not that old and so I suspect the floor may have been down since the house was built.

The Terracotta tiles had not been professionally cleaned for many years and the floor had lost its’ lustre where the sealant had worn away and dirt had become ingrained in the tile, the Grout had also darkened. I went over to look at the floor and perform a test clean, so I could give the owner an accurate quote for renovating the floor.

Terracotta Floor Before Cleaning Milton Keynes

The quote was accepted, and we agreed a date to do the work which would take place over a four-day period. One day to clean the tiles, two days between for it to dry and one day to seal the floor in order to protect it going forward.

Deep Cleaning Terracotta Kitchen Tiles

We started by applying a strong solution of Tile Doctor Pro-Clean to the floor. Pro Clean is a concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser. It is ideal for heavily soiled and neglected floors. After about 10 minutes dwell time we used our scrubbing machine fitted with a black buffing pad to scrub the floor and loosen the ingrained dirt from the pores of the tile.

A wet pick up vacuum was then used to remove the now dirty cleaning solution, we then thoroughly rinsed the floor by hand to remove any trace of cleaning product and so we could inspect the tiles to see if more work was required. In this instance I felt the floor could do with more work, so the process was repeated, and the edges scrubbed by hand.

We let the floor dry a little over lunch but noted a few of the areas were not quite perfect. To get the best result on these areas we then used Tile Doctor Oxy-Gel, this is a stronger gel-based version of Tile Doctor Pro Clean which is perfect for spot cleaning specific stubborn areas.

With the floor clean it was time to turn our attention to the grout and for this we used more Tile Doctor Pro-Clean and a specialized narrow grout brush to meticulously scrub each grout line. The floor was then completely rinsed with water.

Terracotta Floor During Cleaning Milton Keynes

The floor was now spotless but before it could be sealed it would need to be dry, so we left specialised drying equipment in the room and allowed the floor two days to completely dry out.

Sealing a Terracotta Tiled Kitchen Floor

After two days we returned, we used a moisture meter to test that the floor was dry enough to seal. It was thoroughly dry, so we were able to carry on with applying the sealer which can be quite time consuming as you have to wait for the first coat to dry before applying the next. In this case the Terracotta proved to be very porous which is not unusual for a clay tile and it took eight coats of sealer before I was satisfied the tiles were fully sealed. The sealer used to protect the floor was Tile Doctor Seal and Go which leaves a nice subtle satin finish on the tiles. Tile Doctor have a variety of sealers available and we select the sealant to suit dependent on the finish the client wishes to achieve.

The customer was absolutely delighted and left a great review (please see the feedback below)

“Andrew explained the process clearly and the floor looks absolutely stunning. It is hard to believe the difference between before and after. I would have no hesitation in recommending Andrew.

Fiona W, Great Holm”

Terracotta Floor After Cleaning Milton Keynes

 

Source: Terracotta Tile and Grout Cleaning and Sealing Service in Buckinghamshire

Dealing with Mould on Grout in an Uxbridge Shower Cubicle

Ceramic and most Porcelain tiles are very easy to clean which makes them a good choice for shower cubicles, the one problem you will find though is that due to the cementitious nature of grout the top layer does attract dirt as can silicone. As a result, we recommend rinsing down showers with Tile Doctor Oxy-Pro on a regular basis or the problem will build. Mould can also be a problem especially if your bathroom is quite small or has inadequate ventilation to extract the hot steam in which mould thrives.

Ceramic Tiled Shower Cubicle Before Cleaning Uxbridge

This Ceramic tiled shower cubicle at a house in Uxbridge had all these problems and would need something much stronger to deal with the mould and remove the limescale which had also built up. Limescale from hard water is a problem that affects 60% of the UK with the South and East of England is particularly impacted due to the local chalk and limestone geology the water is filtered through. Buckinghamshire is known to have hard to very hard water and these tiny mineral deposits build up slowly on the surfaces of shower cubicles during use.

Deep Cleaning a Ceramic Tiled Shower Cubicle

To get the shower cubicle clean I began by spaying the tile and grout down with Tile Doctor Duo Clean which is a dual action product that is designed to clean grout and remove mould. You leave the product on the tiles for ten minutes and then scrub it in with a stiff brush, it’s hard work and you need to repeat in the stubborn areas, but it gets good results.

The tile and grout were then rinsed down with water and left to dry whilst I popped out for lunch. On my return I dried off any damp areas with a heat gun and took a step back to review the work I had done.

The results were good but unfortunately there were still a few dark stains in the grout which I was unlikely to be able to remove. When this happens, I find the best solution to achieve a consistent appearance is to apply a grout colourant to the grout. Tile Doctor grout colourants come in ten colours are relatively straight forward to apply, I always keep some of the popular colours in stock and on this occasion, I felt a White colourant would work best.

Normally the first stage would be to prepare the grout first with a pre-treater but given the grout had already been scrubbed hard I was able to move onto applying the colourant with a small brush. Grout Colourants not only recolour and rejuvenate the grout lines but also adds a barrier over the grout sealing it in and protecting it from further staining.

Whilst waiting for the colourant to dry I stripped out the mouldy sealant strip between the tile and shower tray and replaced with mould resistant silicone.

Ceramic Tiled Shower Cubicle Before Cleaning Uxbridge

The shower cubicle now looks much fresher and I’m sure will be a pleasure to take a shower in.
 
 
Source: Tile and Grout Cleaning and Renovation Service in Uxbridge

Deep Cleaning Shower Cubicle Grout in Millom

We were asked to look at a renovating a bathroom shower at a house at the The Green, near Millom which was rather useful as it is a short distance from my own home. Millom is a small town in South West Cumbria that actually dates to 1251 when it was given a market charter by King Henry III.

Given the location it wasn’t long before I was able to pop round and review the shower installation. It was clear that the shower needed some Tile Doctor TLC, with mould being a major issue in the silicone seal and grout near the base of the shower.

Bathroom Shower Cubicle Before Renovation Millom

Mould thrives in warm damp environments such as shower cubicles and the problem can usually be traced to a lack of adequate ventilation. Improving the ventilation should resolve the problem permanently however if that’s not possible it can be controlled by regular use of products such as Tile Doctor Oxy-Pro shower cleaner or Tile Doctor Duo Clean which is a double action mould and grout cleaner. Other steps you can take include leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water after a shower.

After reviewing the installation, we agreed on a price and I returned a few days later to carry out the work.

Cleaning Ceramic Bathroom Tile and Grout

On return the first thing we did was thoroughly clean the tile and grout using Tile Doctor Oxy-Gel, our high performance alkaline cleaner and de-greaser in gel form making light work of cleaning vertical tiled surfaces. The gel was scrubbed into all tile and grout surfaces and left to dwell for five minutes then thoroughly rinsed down with water. This process was repeated until we were happy with the result.

The next stage was to remove the mould riddled silicon and small areas of damaged grout at the base of the shower unit. This took some time to achieve as the silicon was in a very poor state. Once all traces of the silicone were removed we cleaned the area with more Oxy-Gel and carefully rinsed all the residues to stop us having any problems when re-applying new silicone.

Bathroom Shower Cubicle During Renovation Millom

The shower tray was cleaned of debris and a heat gun was used to completely dry all areas.

Replacing Shower Grout and Silicone Sealant

Finally, with the mould removed it was clear that a few areas of grout were crumbling and needed replacing. The old grout was raked out and a new batch of mould resistant grout was prepared and applied. Whilst that was drying I also replaced the silicone sealant between the shower tray and tile using a mould resistant silicone.

Bathroom Shower Cubicle After Renovation Millom

We asked the customer to not use the shower for at least 24 hours and as can be seen in the photographs the shower appearance was vastly improved. The customer is very pleased commenting that “it looks like new”.

Bathroom Shower Cubicle After Renovation Millom

 
 
Source: Shower Tile Cleaning and Renovation Service in Millom, Cumbria

Colouring Ceramic Tile Floor Grout in Shropshire

Ceramic tiles don’t have the charm of natural stone, but they are very easy to keep clean; grout on the other hand has a porous top layer that can become stained. This was the problem with a customer of mine who lives in the small rural village of Childs Ercall in the North of Shropshire. The customer had moved in about two years ago and they said that they can keep the floor clean and their main problem was the grout.

I went to take a look at the problem and gave the grout in one section a good scrub with Tile Doctor Pro-Clean which is a strong alkaline tile and grout cleaning product. The result was good and although the grout returned to its original colour they wanted it to be changed.

Ceramic Tiled Kitchen Floor Before Grout Cleaning in Childs Ecrall

Cleaning and Preparing the Ceramic Tile and Grout

Before colouring the grout, it made sense to give the Ceramic tile and grout a thorough clean by scrubbing in a weak dilution of Tile Doctor Pro-Clean with a floor buffer fitted with a scrubbing pad running at slow speed. Once done I rinsed the floor with water and extracted the slurry with a wet vacuum.

With any grit and dirt removed from the floor the next step was to prepare the grout for the colourant. Tile Doctor have an acidic pre-treater cleaner for this which cleans and microscopically etches the grout giving the colourant a superior bond with the colourant. The solution is applied to the grout and then scrubbed in with a stiff brush before being rinsed off with water as before.

Applying Grout Colouring

With the tiles clean and the grout prepped I left the floor to dry for an hour before moving onto grout colouring using a colour of their choosing. There are ten colours in the Tile Doctor range and they are easily applied using a small brush wiping off any excess as you go, it was a large area with a lot of grout lines to cover so took the rest of the day to complete

Ceramic Tiled Kitchen Floor After Grout Cleaning in Childs Ecrall

I have to agree with the customer, changing the grout colour was a good move and I think you will agree the floor now looks much improved. The grout colourant has the additional advantage of providing a barrier over the grout which will protect it from further issues and make it as easy to clean as the ceramic tiles.
 
 
Source: Ceramic Tile and Grout Cleaning and Colouring Service in Shropshire

Floor Grout Cleaning and Colouring in a Lewes Kitchen

Recently, I was called to a work on a Porcelain tiled floor in the kitchen of a house in the East Sussex market town of Lewes where the grout was looking tired. Lewes has a long history that dates all the way back to the Saxons and has many old buildings as a result; this house of course with its modern kitchen and Porcelain tiles wasn’t one of them however the grout certainly looked old.

Cleaning Porcelain Tile and Grout floor

The floor was in good physical condition and Porcelain tiles being very robust as they are didn’t need much maintenance however the grout was very stained, and the house owner wanted it freshening up.

Porcelain Kitchen Tiles Before Grout Colouring in Lewes Kitchen Porcelain Kitchen Tiles Before Grout Colouring in Lewes Kitchen

My first course of action was to give the whole floor a good clean with a medium dilution of Tile Doctor Pro-Clean scrubbed in with a black pad attached to a floor buffer machine. I paid particular attention to the grout and gave it a good scrub using a narrow brush that was run along the grout lines. The now dirty cleaning solution was rinsed off the floor with water and extracted with a wet vacuum, so I could see the improvement. I could then see the difference the cleaning process had made to the look of the Tile and Grout, but it was clear that some of the staining had gone deep into the grout and no amount of scrubbing would get it looking new again.

Recolouring the Grout

It was clear to me that the only course of action to get back a uniform appearance to the grout would be to recolour it so as an initial step I set about drying the grout.

Once dry I began to recolour the grout using a white Tile Doctor Grout Colourant which was applied using a small brush. I was careful to apply thin, even coats and any excess was removed.

Porcelain Kitchen Tiles During Grout Colouring in Lewes Kitchen Porcelain Kitchen Tiles During Grout Colouring in Lewes Kitchen

The tiles were of the large format type, so it only took a few hours to colour the grout lines so the whole job took less than a day to complete.

Porcelain Kitchen Tiles After Grout Colouring in Lewes Kitchen

Once done I revealed the rejuvenated Kitchen floor to the client who was delighted with the results as it lifted the whole look of the kitchen.
 
 
Source: Tile and Grout Cleaning and Restoration Service in Lewes, East Sussex

Regrouting a Porcelain floor with Grey Grout in Cobham, Surrey

This floor was tiled with large format beige porcelain tiles with a white grout which as you can appreciate can soon become dirty. Now you might be thinking that this post is about cleaning grout which would make sense as I’m normally asked to clean grout, however on this occasion the customer wanted it removing completely and then re-grouting in a darker colour.

Grout re-colouring grout is easily done using a Tile Doctor Grout Colourant which comes in ten different colours but in this case there was an amount of cracked and missing grout which needed replacing anyway.

Floor Grout Before Replacement Cobham

The house was in the surrey village of Cobham which dates back to Roman times and is now known for being an affluent place to live with many large houses.

Removing Grout

Removing existing grout is a messy job that can create a lot of dust so before starting work I positioned my vacuum cleaner adjacent to the tile so any dust would be extracted away. There are a number of ways to remove grout but I find the best way is to use a special oscillating tool which makes quick work of the job. Fortunately due to the large format porcelain tiles with tight grout lines I was able to completely remove all the grout within a few hours.

Grouting a

After a clean up I was ready to mix the new grey grout and start rerouting the tiles. I always use expanding grout for this as it lasts longer and won’t shrink like cheaper products which can rack as a house moves slightly. Once mixed the new grout was pushed into the grout lines with a rubber float and the excess polished off.

I managed to complete the job in a day and before leaving I have the floor a buff with a soft white pad.

Floor Grout After Replacement Cobham

The Grout tiled hallway floor now looks amazing.
 
 
Source: Grout Cleaning, Colouring and Maintenance Service in Cobham, Surrey

Deep Cleaning and Colouring Grout in a Beckenham bathroom

Recently I was asked to renovate the tile and grout of this windowless bathroom in a Beckenham flat which was not looking its best. The Ceramic tiles had become dull due to a build up of Limescale and the grout had become stained from shampoo dyes and mould.

Ceramic Bathroom Tiles Grout Before Cleaning Beckenham
Without strong ventilation and regular cleaning most bathrooms can end up with these problems however with the right products and techniques they can be renovated as you will see below.

Ceramic Bathroom Tiles Grout Before Cleaning Beckenham

Deep Cleaning Bathroom Tile and Grout

My first action was to apply a liberal amount of Tile Dr Oxy-Gel which is a strong alkaline tile and grout cleaning product that comes in a gel form. Being a gel it’s able to sticks to vertical surfaces for longer allowing it to break down the Limescale and soap residue that had taken up residence. Once it had been left to dwell for around thirty minutes, it was scrubbed off with water and a pan scrapper and then dried with a micro cloth. You can use this process with glazed ceramic tiles like these but for natural stone I would have used a different approach.

I then sprayed Tile Doctor Duo Clean, which is a grout cleaner and mould remover, onto the grout lines. I left the grout with the Duo Clean on it for about ten minutes before scrubbing and rinsing off with water.

The process was repeated where needed until I was happy that the tile and grout were as clean as possible however to really give the bathroom a fresh look I decided to completely renovate the grout with the application of a Grout Colourant.

Grout Colouring Bathroom Wall Tiles

There are ten colours to choose from in the Tile Doctor range of Grout Colourant’s and in this case I felt the best outcome would be to use a White colourant to match the tiles and restore the original look of the bathroom; the customer however wanted a grout colour that would provide a contrast against the white tiles, so in the end we opted for a light grey colour.

The colourant is easily applied directly to the grout and in this case I waited for the tiles to dry before applying two coats with the aid of a small brush making sure to remove any excess that comes into contact with the tile.

I finished the renovation by cutting out the original mastic sealant from around the bath and replacing with a new mould resistant silicone in white to match the bathtub.

Ceramic Bathroom Tiles Grout After Cleaning Beckenham
The bathroom now looks transformed and the epoxy grout colourant adds a layer of protection to the grout that will keep it looking good for some time to come.

Source: Bathroom Tile Cleaning and Renovation Service in Kent

Renovating Mouldy Grout in Greater Manchester

An elderly couple from the Greater Manchester town of Eccles were in touch recently regarding their Ceramic Tiled Bathroom, they had a big problem with mould build-up due to a broken extractor fan and wanted it removing. Mould grows in humid conditions and with the extractor fan out of action it soon started to spread. If you have been reading my blog, you will have seen some of the bathroom transformations we have completed over the years, so I was confident we could resolve the problem for them and paid them a visit to take a look.

Mouldy Bathroom Before Restoration in Eccles

You can see from the photographs that the tiles were in good physical condition, but the grout and silicone mastic sealant was stained with shampoo dyes and mould spots, the worst part however was the ceiling which was covered in mould growth. I ran a test clean on the bathroom wall grout and ceiling which went very well so we quickly agreed on a date to clean the whole bathroom.

Mouldy Bathroom Before Restoration in Eccles

Cleaning a Ceramic Shower Cubicle

They say you should always start at the top and work down so my first task was to treat the mouldy bathroom ceiling with Tile Doctor Duo Clean which although marketed for use on grout it worked just as well on paint to remove the mould. When done with ceiling I moved on to the wall tiles spraying on Duo Clean, letting it soak in for ten minutes, working it in to the grout with a stiff brush and then rinsing off with water.

With four walls of tile and grout and a ceiling to clean the overall cleaning process took two days to complete and at the end of the second day I turned my attention to the silicone sealant. Taking care not to scratch the bathtub I carefully stripped out the silicone in-between the tile and bath with a sharp knife. Duo Clean works on silicone as well but you do need to catch it early so often the easiest thing to do is to replace it rather than clean it. I replaced the silicone with a good quality mould and bacteria resistant silicone.

When I returned on the next day I carried on with the Top/Down approach by turning my attention back to the ceiling which I painted with a white moisture resistant emulsion paint.

Mouldy Bathroom After Restoration in Eccles Mouldy Bathroom After Restoration in Eccles

With the ceiling freshly painted I then took another look at the grout which although clean was not a perfect white anymore and looked dull and uninviting. We do find this can happen with grout, especially if it isn’t the subject of a regular cleaning regime. There is a remedy though and what we find works well in these cases is to recolour the grout with an epoxy-based Grout Colourant which not only rejuvenates the grout it also protects it for years to come.

Grout Colouring Bathroom Wall Tiles

There are ten colours to choose from in the Tile Doctor range of Grout Colourant however in this case I felt the best outcome would be to use a White colourant to match the tiles and restore the original look of the bathroom.

The colourant is easily applied directly to the grout and in this case, I applied two coats with the aid of a small brush making sure to remove any excess that comes into contact with the tile. After applying the colourant, the bathroom transformation was complete, and it looked like a new installation.

Mouldy Bathroom After Restoration in Eccles

It was a lot of work however I was really happy with the outcome and so were the clients who even left me a nice tip. The last thing to sort out is the extractor fan, however they will need a different tradesman for that job.
 
 
Source: Ceramic Tile Cleaning and Renovation Service in Greater Manchester

Using Black Grout Colourant to Revitalise a Shower Cubicle

Hove is a town in East Sussex which is confused with – and somewhat overshadowed by – its larger, more well-known neighbour, Brighton. In fact, the tendency for people to confuse Hove and Brighton is such that a running joke in the area amongst residents of Hove is to reply “Hove, actually” when they are asked if they live in Brighton.

But Hove is no small town – in fact, its home to more than 90,000 people. As the East Sussex Tile Doctor I am a frequent visitor to the Brighton and Hove area. Most recently, I was called to a property to address a Porcelain tiled shower cubicle which was really starting to annoy the owner.

She felt like she could never seem to keep it clean of grime and the dyes in soaps that invariably stain the grouting. As a result, the whole cubicle looked worse for wear – you can see this in the photo below.

Shower Room Tiles Before Grout Colouring in Hove Shower Room Tiles Before Grout Colouring in Hove

Not only did the customer want the tiles and grout cleaned up, but she had been impressed by some subway tiles she had seen where a darker grout had been used, she liked the effect it gave and wanted to see if it could be replicated. I suggested that we could clean up the tiles and recolour the grout using a Black Tile Doctor Grout Colourant. She accepted the quote for the work and I was able to get started soon after.

Cleaning Porcelain Shower Tiles and Grout

To begin the restoration, I gave the tile and grout a deep clean using Tile Doctor Pro-Clean, which is a highly effective alkaline-based cleaner for Tile, Stone and Grout.

This left the tiles looking fresher, but the grout lines – which were very badly stained – would as need to be recoloured for the best result. Before applying the Grout Colourant, the grout needed to be prepped in order to achieve a strong bond with the colourant. To do this I applied Tile Doctor Grout Clean-Up which is an acidic product normally used for removing grout smears but in this case, I used it to etch the surface of the grout. Once done I gave the grout a rinse with water to remove any trace of cleaning product.

Recolouring Shower Tile Grout

The final step in the restoration was to recolour the grout in black to achieve that subway effect the customer desired. There are actually ten different colours in the Tile Doctor Grout Colourant range, including Charcoal Grey, White, and Chocolate, as well as Black.
The colourant in basically painted onto the grout using an applicator brush, you then let it dry for a while and then wipe off any excess from the tile surface. It looks a little horrendous in the photographs above but wait until you see the final result.

Shower Room Tiles During Grout Colouring in Hove Shower Room Tiles During Grout Colouring in Hove

Once the grout colourant sets you find that not only does it effectively recolour and rejuvenate the grout, but it also makes a barrier over the grout effectively sealing it in and making it easier to clean in future.

The last step was to strip out the mould stained silicone sealant from around the base of the shower cubicle and replace with a quality mould resistant sealant. This final step really finished off the renovation and the photographs below show the outcome, which I think you will agree was quite a transformation. Thankfully, it was exactly what the customer was looking for!

Shower Room Tiles During Grout Colouring in Hove Shower Room Tiles After Grout Colouring in Hove

 
 
Source: Shower Tile and Grout Cleaning and Renovation Service in East Sussex

Grout Colouring an Office Toilet in Buckinghamshire

Although much of the work Tile Doctor does is residential were more than happy to take on commercial tile cleaning jobs, as well. In fact, many office buildings contain very nice tiled kitchens and bathrooms, but the cleaners who visit them daily are rarely have the right training and products to keep stone, tile and grout looking it’s best.

In some cases, a long period of time passes before the facilities manager or cleaning company reach out to seek help from companies like Tile Doctor and by this time the tiles can be a very bad way. With this in mind I received a call from an office manager in Milton Keynes who needed help to restore the appearance of the tile and grout in a Porcelain tiled toilet.

Commerical Porcelain Toilet floor Milton Keynes Before Cleaning

You can see from the photograph that the White floor grout had become stained and unsightly through use and a lack of adequate grout cleaning. The owner of the building had decided, in fact, that he wanted to change the grout to a dark colour but was concerned about the cost and time it would take to remove the original grout and applying new.

I suggested to him that we give the tile and grout a deep clean and then simply recolour the grout with a Tile Doctor Grout Colourant. Additionally, it’s a relatively quick process which could be done outside of office hours to minimise disruption. The customer was happy with this solution, so I we agreed a time for me to come back and carry out the work.

Cleaning and Grout Recolouring of a Porcelain Tiled Office Toilet

The restoration process began with a deep clean of the tiles using Tile Doctor Pro-Clean, which is a strong alkaline tile and grout cleaner. The product was applied to the tile and grout and then left to dwell for a short period before being worked in with a large scrubbing pad fitted to a rotary machine. Pro-Clean very reliably breaks down ingrained dirt and muck and can even be used to remove sealers in a concentrated form.

Next, I paid special attention to freshening up the stained grout lines. This was done using Tile Doctor Grout Clean-Up, an acidic product which is usually used to remove grout smears from the tile surface but in this case applied to etch the grout surface to ensure a stronger bond with the colourant.

The tile and grout was rinsed and then dried before I could continue with the final step of recolouring the grout lines to make them darker, as per the customer’s request. This was done using the Tile Doctor Grout Colourant in Grey, which is just one of ten colours available. Other options include White, Chocolate, Sandstone and Black.

The Grout Colourant serves not only to recolour and rejuvenate the grout lines but also adds a barrier over the grout sealing it in and protecting it from further staining.

Commerical Porcelain Toilet floor Milton Keynes After Grout Colouring

I think you’ll agree, looking at the photo of the result below, that the toilet now looks much smarter and more professional. The customer was very happy with the outcome of the work and left me the following feedback on the Tile Doctor feedback system.

Great diligent work undertaken by Andrew-very pleased with the outcome.
Mr. Hirani, Milton Keynes 03 February 2018

 
 
Source: Grout Cleaning and Restoration Service in Milton Keynes, Buckinghamshire

Renovating Grout in a Porcelain Tiled Bathroom in East Sussex

Anyone who wants to put their house up for sale should consider refurbishment projects that can help increase the value of the property and make it more appealing to potential buyers. This is especially the case in rooms with tiled floors or features, which many buyers find particularly attractive. If you’ve left your tiles – whether they’re in the bathroom, kitchen or elsewhere – in a bit of a state, chances are that it’ll put people off.

Recently, I was contacted by a customer who was in the process of refurbishing their house in Eastbourne prior to putting it up for sale. As part of the refurbishment, the customer wanted the Porcelain bathroom tiles to look ts absolute best for anyone viewing the property. While the bathroom room had been installed not too long ago, the grout was not looking very attractive.

Grout Before Changing Colour in Eastbourne Bathroom

This was due mainly to the fact that the grout was looking dark and stained. I was asked to give the tiles and grout a thorough clean before recolouring the grout to make it lighter and more appealing.

Cleaning and Re-Colouring Porcelain Shower Tiles and Grout

To achieve the best results, the grouting in shower cubicles needs to be cleaned before it can be recoloured. To do this, I used Tile Doctor Duo Clean, a product which acts fast to removes any mould and black spots from the grout. If necessary, it can also be used to clean plastic or enamel baths and showers.

The product was applied and then scrubbed into the grout carefully using a specialised grout brush, and the area was left to dry. Once the cubicle was dry, I applied the Tile Doctor Grout Colourant in small sections, so that I could wipe off any excess from the tile surface before it dried.

Grout During Changing Colour in Eastbourne Bathroom

Tile Doctor Grout Colourants are available in 10 different colours, but in this case the customer opted for a normal white as it contrasts nicely with the grey tiles. The Colourant not only recolours the grout lines; it also seals and rejuvenates them.

Grout After Changing Colour in Eastbourne Bathroom

The shower room was quite large, so the job took most of the day to complete. But it was certainly worth it. The customer was very pleased with the results, and we wish them the best of luck with selling the property.

Grout After Changing Colour in Eastbourne Bathroom

 
 
Source: Grout Cleaning and Colouring Service n East Sussex

Deep Cleaning and Sealing Grout in a Sun Room in Northamptonshire

A customer from Rushden which is a large town in the east side of Northamptonshire, and my home town asked me to take a look at the Ceramic tile and grout in his Sun room. He has a large dog that sleeps on the sofa in this room and over the years the dog has walked in mud which has slowly degraded the grout lines and I suspect had probably never been sealed correctly or sealed at all.

The glazing on Ceramic tile is very resilient so we usually find it’s the grout discolouring that becomes most noticeable first due to the cementitious top layer which can trap dirt. In this case the Ceramic tiles had dulled over the years and as you might expect the white grout lines had become soiled and were almost black in places.

Ceramic Tile and Grout Before Cleaning Rushden Sun Room Cleaning Ceramic Tile and Grout Before Cleaning Rushden Sun Room

Deep Cleaning Ceramic Tile and Grout

To get the tile and grout clean the floor was first soaked in a strong dilution of Tile Doctor Pro-Clean and this was left to dwell for ten minutes. A rotary machine fitted with a black scrubbing pad was then used to scrub the cleaning solution into the tile and release the dirt. The pad can struggle to reach the recessed grout so to ensure this was also clean it was given a good scrub with a narrow stiff brush.

Cleaning Ceramic Tile and Grout During Cleaning Rushden Sun Room

We then used a spinning tool which forces hot water under high pressure onto the floor whilst simultaneously extracting the dirty water with a powerful vacuum. The objective of this action is to power wash the floor whilst rinsing and extracting the dirty cleaning solution at the same time.

Cleaning Ceramic Tile and Grout During Cleaning Rushden Sun Room

We inspected the grout lines and stubborn stains were treated with Tile Doctor Grout Clean-Up which was scrubbed in with hand brushes, this was then rinsed a second time until we were happy with the results. Grout Clean-Up is an acidic product that is particularly good at removing grout smears which can form a haze over a tile reducing its brilliance.

We then polished the floor with a white buffing pad and allowed the floor to dry overnight before returning the following day to apply Tile Doctor Ultra-Seal to all grout lines.

The furniture was too large and heavy for the customer to move out of the room, which was on a lower level than the rest of the ground floor. As a result, it was necessary to clean the floor in sections moving the furniture around the room on pads as needed.

Cleaning Ceramic Tile and Grout After Cleaning Rushden Sun Room

The Sun room floor look great afterwards, the grout especially looked clean and the sealer should ensure it stays that way for some time to come.
 
 
Source: Tile Cleaning and Sealing Service in Northamptonshire

Protecting Shower Grout with a Grout Colourant

When renting property out a property it makes a lot of sense to give it a quick facelift to ensure it’s more attractive to future tenants, not only will it rent faster but it should also command a better price. Many landlords don’t realise this but giving bathrooms, a facelift is the one thing you can do quite cheaply and quickly that can rapidly improve the appearance and desirability of a house, after all no-one wants to rent a place with grotty tiles!

A returning customer of mine recently contacted me about restoring the condition of a Ceramic tiled shower cubicle in a flat she owned in the Surrey village of Oxshott. She was about to rent the property out to a couple of international students, and so wanted it looking its best in all aspects.

Tiled Shower Before Renovation in Oxshot

You may be wondering why international students would want to live in Oxshott but it’s not too far at all from the University of Surrey. The town of Oxshott is quite large and has a low population density. There are many private roads in the village – and it has been named the “most expensive village in England” and so a very desirable location.

Cleaning a Ceramic Tiled Shower Cubicle

We tend to follow a tried and tested method that we have developed at Tile Doctor for restoring shower cubicles. To begin, I cleaned the grout lines using our acidic cleaning product, Tile Doctor Clean-Up. The product was scrubbed into shower wall tile and grout using a handheld rotary machine fitted with a six-inch black scrubbing pad.

Being a concentrated phosphoric acid cleaner, Grout Clean-Up effectively removes mineral deposits (salts etc) and grout smears from the tile surface to leaving it looking much fresher, it also prepares the grout for a superior bond with the grout colourant that was to be added later.

Following this, I scrubbed the tiles down with Tile Doctor Pro-Clean to provide a general clean and to remove any other muck and dirt. This was followed by a rinse with water to remove any trace of cleaning product from the tile and grout. The next step was to remove all the existing silicone mastic with a sharp knife; the mastic sealant stained with mould and much in need of replacement. Once all the rubbish was swept out, I dried any remaining dampness from the grout and tiles with a heat gun.

Grout Colouring a Ceramic Tiled Shower Cubicle

This left the grout ready to be recoloured. I did this over the course of a few hours, using a White colourant from the Tile Doctor Grout Colourant range. White is just one of ten colours available in the range and was chosen in this case to give the grout a really fresh look and to blend in with the White Ceramic tiles.

The application of Grout Colourant not only colours the grout joints – it also seals and rejuvenates them. It also dries quickly, so I could apply a second coat quite soon after the first, removing any excess as I went.

Once the restoration was finished, I resealed the shower base with fresh silicone mastic again in White to match the tile and grout. As a courtesy, I also cleaned the shower glass too, leaving an excellent result overall – and one very happy customer!

Tiled Shower After Renovation in Oxshot

 
 
Source: Ceramic Tile Cleaning and Restoration Service in Surrey

Tackling Discoloured Grout in Inverclyde

This bathtub with shower over was at a house in the old shipbuilding port of Greenock within the historic county of Renfrewshire. I’m not sure you can appreciate it from the before photograph below, but the grout was white and was starting to discolour. The owner of the house didn’t want it to get any worse and asked us for help.

Changing Grout Colour in Greenock Bathroom Before

Preparing the Grout

We discussed the options and the benefits of applying a grout colour which would not only change the colour but also add a layer of protection over the grout which would be much easier to keep clean going forward.

With the decision made we set about cleaning the grout first with a Grout Colourant Pre-Treater that cleans and etches the grout resulting in a better bond with the grout colourant. This was followed by rinsing the grout with water to remove any dirt and remove the traces of pre-treater before drying it off with a heat gun ready for the next step.

Grout Colouring

The customer had decided on a Chocolate grout colour, so it would blend in with the brown tiles more effectively. So, once the grout has dried two coats of Tile Doctor Grout Colourant were applied over the grout with a small brush. This product is basically painted on top of the existing grout any any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long-lasting barrier protecting the grout and as I mention before making it much easier to clean.

Last step before leaving was to strip out the stained silicone sealant between the top of the bath and tile and replaced with fresh new white silicone to match with the white bathroom suite.

Changing Grout Colour in Greenock Bathroom After

The job only took a day to complete and the owner was very pleased with the way the tiles now looked.
 
 
Source: Grout Cleaning, Colouring and Restoration Service in Inverclye

Restoring 45 Student Shower Cubicles in Oldham

Earlier in the year we were contacted by the facilities manager of one of the student apartment blocks in Oldham which provides accommodation for the students of Oldham University. They were looking for a firm to revamp the student en-suite bathrooms during the summer recess. The building has 270 apartments and we had been asked to quote for the renewal of the ceramic tile and grout of around 45 shower cubicles (possibly more) which were judged to be in a bad state and beyond the ability of their in-house cleaning team.

The University runs degree courses from Accounting to Sports Coaching and as you can image Students are not known for their cleanliness so we knew we would have our work cut out completing the assignment on time.

Several companies competing for the work however after successfully demonstrating what we can do with a patch test in one of the bathrooms and comparing of quotes I’m pleased to say the facilities company awarded us the contract!

Student Shower Cubicle Before Cleaning in Oldham

Tile and Grout Cleaning

We returned in the summer and facing a time limit to complete the work we worked out a system whereby we would spray the Tile and Grout down with Tile Doctor Duo-Clean, let it soak in for about ten minutes and then scrubbed it in by hand with a stiff brush. Duo Clean is an effective double action grout cleaner and mould remover that can remove mould and blackspot from grout and silicone. It’s really useful for cleaning shower tiles as the spay attachment mixes the product with air as its spayed onto the surface allowing it to stick to vertical surfaces more easily. Once the tile and grout was clean it was rinsed off with water and stubborn areas re-treated until clean.

Duo Clean is effective at dealing with Mould on Silicone in most situations however some of the silicon sealant was beyond cleaning so in these cases the old Silicone was stripped out and replaced with new.

We were able to clean all the shower tile and grout using this process however I had brought a long a few Grout Colouring kits as a back-up solution just in case. Once the grout is clean the colourant is painted on using a small brush and makes a huge difference to the look of a shower. There also inexpensive and provide a barrier over the grout so it keeps its appearance for longer.

There were a lot of bathrooms to cover so once the cubicle was spotless we immediately moved onto the next one completing the whole project three days ahead of the due date.

Student Shower Cubicle After Cleaning in Oldham

The facilities manager was delighted with results and timing of our work and it just goes to show that using the right cleaning products can save you time and money compared to the alternative of re-grouting.
 
 
Source: Tile and Grout Cleaning and Restoration Service in Lancashire

Grout Cleaning and Sealing in a Gloucestershire Hallway

Cirencester is a large market town in the East of Gloucestershire known for its rich history dating back to the Roman times, when it was known as Corinium. This area is also home to the Royal Agricultural University, the oldest agricultural college in the English-speaking world.

I visited the town recently to see a customer who was having significant problems with the cleaning of her Ceramic tiled hallway. Ceramic tiles are always a popular choice in high traffic areas like Hallways and Kitchens due to their durability, as well as water and scratch resistance. However, this floor had been installed a decade ago and during that time had not received adequate maintenance. Although the Ceramic tiles themselves had not faired too badly the grout lines were heavily ingrained with dirt, making them near impossible to clean with everyday cleaning products.

Ceramic Grout Lines Cirencester Before Cleaning

The property owner had tried numerous products without success and determined to get the grout clean again sought assistance from her local Tile Doctor. I deal with these types of issues all the time so I was happy to pop round and see what could be done to restore the floor back to its peak condition.

Cleaning a Dirty Ceramic Tiled Hallway

To begin, I set about cleaning the grout lines using a mixture of Tile Doctor Remove and Go, which is a multi-purpose stripper and degreaser that breaks down any old sealer, and Tile Doctor Pro-Clean, which is a strong alkaline-based cleaner suitable for all types of stone and tile. I applied the cleaning solution and left it to dwell for about 30 minutes, before using a grout brush to lift away a decade’s worth of grime and muck.

Next, I used Pro Clean again to scrub the tiles in combination with a black scrubbing pad fitted to a rotary machine, before rinsing the entire floor with fresh water to remove any traces of chemicals. Then, I dried the grout lines with a heat gun and left them to cool for about 10 minutes. The grout lines were subsequently ready to be sealed.

Sealing a Ceramic Tiled Hallway

With the floor ready to be sealed, I applied Tile Doctor Ultra-Seal to the grout lines using a pipette, which is a tool used to deliver a measured quantity of sealer.

Ultra-Seal is a premium sealer which is formulated to provide maximum stain protection. While leaving the grout with a natural look, the sealer will keep the grout looking fresh and free of ingrained dirt for some time to come.

Ceramic Grout Lines Cirencester After Cleaning

The customer was amazed at how quickly I could transform the condition of the grout. As you can see from the photo below, the condition of the grout really shapes the appearance of the floor – and now these Ceramic tiles are a real asset to the property once again.
 
 
Source: Tile and Grout Cleaning and Sealing Service in Gloucestershire

Deep Cleaning and Sealing Mouldy Shower Grout

Available in a variety of styles and designs Porcelain tiles are harder than normal Ceramic tiles and are known for their durability and water resistance, making them ideal for use in shower cubicles and bathrooms.

However, as I’m sure most people already know, shower tiles are not the easiest to keep clean and fresh. These tiles are exposed daily to a multitude of acidic soaps and shampoo dyes, and if proper precaution is not taken to rinse away the excess after using the shower, mould will grow very quickly on the grout.

This shower cubicle, constructed from Porcelain tiles, is a typical example of this. As you can see from the photo below, the mould problem was very apparent. I was asked by the property owner, who lives in Didcot, a railway town in South Oxfordshire, to refresh it after what must have been years of neglect. Here’s how I did it.

Porcelain Shower Before Renovation in Didcot

Cleaning a Porcelain Tiled Shower Cubicle

The first process in restoring this shower cubicle was to spray the walls with Tile Doctor Duo Clean, which is both a grout cleaner and a mould remover. I left it to dwell for 45 minutes, before proceeding to scrubbing into the grout with a stiff brush. I worked in sections, spraying more Duo Clean onto the tiles as I moved along the length of the walls.

Following this, I rinsed the entire cubicle with fresh water to remove any traces of chemicals and used my wet-vac machine to dry it quickly. The next process was to remove the old, mouldy silicone and replace it with fresh silicone.

Sealing a Porcelain Tiled Shower Cubicle

With the shower cubicle now fresh and clean, it was now time for me to seal the grout and tiles.

I did this using Tile Doctor Wall Grout Sealer Spray, which is a water-based grout sealer that prevents oil, water and acid-based contaminants – including soaps and shampoos – from spoiling the appearance and colour of grout. It does this while allowing for moisture vapour transmission.

Check out the photo below – you can see that after a short day’s work, the appearance of the cubicle has been completely transformed. The customer was very pleased with the result and the addition of the sealer will ensure it stays this way for some time to come.

Porcelain Shower After Renovation in Didcot

 
 
Source: Shower Tile Renovation Service in Oxfordshire

Sealing Bathroom Tiles to Prevent Staining and Mould

Having mould in your bathroom is never a desirable situation, especially in a family home with young children. Additionally, severe mould can cause a range of health issues, including respiratory problems, nasal congestion, and throat irritation, so it’s important to remove it as soon as possible.

I mention this as I was recently called out to a family home in Bedford recently because the parents were getting worried about the mould developing in the Ceramic tiled bathroom, especially on the lower tiles and silicon around the bath. Naturally, they wanted it to be removed as they didn’t want to expose their children to it, so a quote was issued and the work to restore the tiles was booked in for the following week.

Ceramic Tiled Bathroom Before Cleaning Bedford Town Centre Ceramic Tiled Bathroom Before Cleaning Bedford Town Centre

Cleaning and Sealing a Mouldy Ceramic Tiled Bathroom

Before starting the work, I covered the bathtub with dust sheets and towels to prevent any chemical spillages. Then, to begin, I applied Tile Doctor Mould Away which is specially formulated to removing mould and black spots from grout and silicone. This is quite a potent product, so it is advisable to wear protective gloves and goggles.
I sprayed the Mould Away on the entire area around the bath and shower unit, as well as the pedestal wash hand basin, before scrubbing it in by hand using a stiff brush. I left this to dwell while I started to cut out the old silicon from around the bath, and once this had been done, I rinsed the product off the tiles.

Next, I diluted a solution of Tile Doctor Grout Clean Up with water, this product contains concentrated phosphoric acid and is designed to remove grout haze, mineral deposits, and other smears. This solution was sprayed onto the worst-affected areas of the grout to remove any remaining soil deposits. I also gave the tiles a second rinse and, while the grout was drying, I finished cutting out and removing the old silicon.

Following this, I lightly dried all areas with a heat gun and sealed the grout with Tile Doctor Ultra-Seal, which is a natural-look, penetrating sealer deigned to provide maximum stain protection. Finally, I installed a fresh mould-resistant silicone sealant between the tile and bath to replace the old, mouldy silicone.

Ceramic Tiled Bathroom After Cleaning Bedford Town Centre Ceramic Tiled Bathroom After Cleaning Bedford Town Centre

Within a short day of work, I had managed to completely transform the appearance of this Ceramic tiled bathroom. The customer was extremely pleased with the result.

Mould problems are extremely common in small bathrooms with inadequate ventilation. Whilst the regular application of Tile Doctor Mould Away will keep the problem in check you can also improve the ventilation by leaving the bathroom door and a window open for a while after use.
 
 
Source: Tile, Stone and Grout Cleaning and Restoration in Bedford

Sealing Grout with a Pippette in a Westmancote Kitchen

This customer who lives in the old picturesque village of Westmancote, Gloucestershire asked me to do a home survey on their ceramic kitchen tiles which had been laid around fifteen years prior. With the exception of general cleaning not much had work had been done to the tile and grout and now the tiles were looking dull and the grout had turned black.

Ceramic Tiled Floor Westmancoate before cleaning

As part of the survey I ran a test clean on part of the floor and the tile and grout came up really well which convinced the customer to give me the job and I was soon booked in to return to complete the floor and work my magic.

Ceramic Tiled Floor Westmancoate before cleaning Ceramic Tiled Floor Westmancoate Cleaning Grout Lines

Deep Cleaning Ceramic Tile and Grout

The first job was to give the floor a sweep to remove any grit and then I set about cleaning the grout lines. The grout had trapped a lot of dirt so I decided to start with the application of Tile Doctor Remove and Go which is a strong cleaner/stripper that is safe to use on all types of tile and grout. The Remove and Go was left to soak into the grout for about ten minutes before being scrubbed in with a stiff grout brush. This process released the dirt and the now soiled solution was rinsed away using water which was then extracted using a wet vacuum.

Next step was to turn my attention to the Ceramic tiles which needed a deep clean so this time I applied a medium dilution of Tile Doctor Pro-Clean, left to dwell for ten minutes then ran over the tiles with tan pad fitted to a rotary buffing machine. Once the floor was done I rinsed away the soiled cleaning solution with water and extracted with the wet vacuum.

Sealing Floor Grout

I find it’s always the grout that lets down the appearance of a Ceramic tiled floor which are usually fairly maintenance free, to guard against this I always recommend the grout is sealed. Given the condition of the grout in this case it was definitely a good idea as I’m sure it wouldn’t be long before it started to discolour again.

With this in mind I sped up the drying of the grout lines with a heat gun and once done I sealed the grout lines using Tile Doctor Ultra Seal applied carefully with a Pipette.

Ceramic Tiled Floor Westmancoate after cleaning Ceramic Tiled Floor Westmancoate after cleaning

The customer was pleased with the end result and left the following feedback via the Tile Doctor feedback system.

Very professional work. We were sold on it when he came to quote and did a small patch clean. Malcolm was able to come within a few days of confirming his price was acceptable and the job was done swiftly and to an excellent standard. We now have a new floor!
 
 
Source: Tile and Grout Cleaning and Restoration in Gloucestershire

Deep Cleaning and Sealing Grout in a Gloucester Hallway

Ceramic tiles are usually glazed and therefore non-porous, so when the floor starts to lose its appearance there’s a good chance the problem relates to the grout. This is because the top layer of the Cementous grout is rough and will attract a build-up of dirt over time.

Once dirt becomes ingrained into any porous surface, tile or grout, it isn’t easily removed using supermarket cleaning products. In fact, many standard cleaning products are acidic which can have a negative impact on many surfaces (always read the label before use).

I mention this as I was contacted about restoring a Ceramic tiled floor at a house in my local area of Gloucester. Interestingly the tiles as well as the grout lines had become badly soiled and discoloured, and the property owner was at a loss at how to get them clean.

Ceramic Tiled and Grout Before Cleaning in Gloucester Ceramic Tiled and Grout Before Cleaning in Gloucester

Deep Cleaning Ceramic Tile and Grout

The tiles were located in the hallway which is one of the busiest areas of any house and as a result had seen a lot of dirt being trampled in and now required a deep clean.

To get them clean I applied Tile Doctor Pro Clean, which is our reliable high alkaline cleaner. I used a strong dilution and let it soak into the Tile and Grout for a short period before scrubbing it in using a buffing machine fitted with a scrubbing pad. This helped to remove any initial layers of ingrained dirt:

Next, I applied Tile Doctor Remove and Go, which is designed to remove heavy instances of soil as well as old dealers, adhesives, and paint stains, to the grout lines. This was left to soak for 20 minutes and I then scrubbed the grout lines with a stiff grout brush.

When I was satisfied that all of the tiles and grout line was clean, I rinsed the floor with water which was extracted with a wet vacuum and then dried all grout lines with a heat gun.

Sealing a Ceramic Tiled Floor

The customer was concerned that the grout lines would darken again over time due to more ingrained dirt, so I recommended that they were sealed in order to protect them.

So, after checking the grout lines were dry a moisture meter, I sealed the grout lines using Tile Doctor Ultra Sealer applied with a pipette. The pipette ensures the sealer is delivered exactly where its needed. Ultra Seal is a solvent-based impregnating sealer designed to provide maximum protection against ingrained dirt and staining.

I should point out that Ceramic tiles are glazed and therefore won’t take a sealer. I think you will agree the floor look much better after a fresh clean and seal. Certainly, the customer was very happy and the hallway looks like new!

Ceramic Tiled and Grout After Cleaning in Gloucester Ceramic Tiled and Grout After Cleaning in Gloucester

 
 
Source: Tile and Grout Cleaning and Restoration in Gloucestershire

Restoring the Appearance of a Mouldy Shower Room in Cumbria

One of the first issues people have with shower rooms is the Silicone needs to be replaced, even a good quality Silicone like Mapei Ultra-seal which is fully waterproof and stain and mould resistant can still succumb to persistent damp issues. In fact it can get so humid in these areas the warm atmosphere is akin to a tropical rain forest.

To avoid the build-up of mould I recommend you rinse the wall tile and silicone down with plain water from the shower head after every shower and then leave the tiles to dry. Open the window and door to let out the warm condensation and after 5 to 10 minutes partly close the window (to the security setting) and then partly close the door, this then normalizes the room temperature thus inhibiting mould spores from blooming, as mould wont start to Spore on a cold room.

Shower Room Before Restoration Kendal

The pictures were taken from a shower room at a house a few miles up the road in Kendal where mould had caused a lot of staining to the silicone sealant and to the tile and grout both inside the shower cubicle and in the bathroom itself. There were also a couple of loose tiles around the base of the shower cubicle which needed to be re-fixed.

Shower Cubicle Before Restoration Kendal

Cleaning Ceramic Tile and Grout

We started by spraying the tile and grout down with Tile Doctor Pro-Clean which is a strong alkaline cleaner, spraying it on mixes it air which helps it to stick to Vertical surfaces allowing it to get to work on the dirt. We left it to dwell for ten minutes before scrubbing it in by hand using a stiff grout brush; this process certainly improved the grout but unfortunately it had become too badly stained to be satisfactory so we decided to recolour the grout using a white grout colourant.

Once the shower tile was dry the loose tiles were removed and the damp plaster board behind chopped out and replaced. The tiles were then cleaned up, fixed back into position, then grouted and the silicone sealant around the base of the shower cubicle was stripped out and replaced with new.

Shower Cubicle During Restoration Kendal Shower Cubicle During Restoration Kendal

Colouring Grout

One to two coats of white colourant were applied to the grout throughout the shower cubicle and shower room in order to get a uniform appearance and this final touch completed the transformation.

Shower Cubicle After Restoration Kendal

The other advantage of these particular colourant products is that they are epoxy based and form a barrier of the grout preventing future staining and making it very easy to clean going forward.

Shower Cubicle After Restoration Kendal

I think you will agree bathroom now looks like it was recently installed.
 
 
Source: Tile and Grout Cleaning and Restoration in Cumbria

Removing Mould from Grout in a Shower Cubicle

The photographs below are from the bathroom of a house in the Moston area of Manchester which is primarily residential and only 3 miles away from the city centre. My customer had been primarily concerned with the removal of unsightly mould but was also keen to have the grout in the ceramic tiled shower cubicle given a good deep clean.

Ceramic Tiled Shower Cubicle Before Restoration Moston Ceramic Tiled Shower Cubicle Before Restoration Moston

Cleaning a Ceramic Tiled Shower Cubicle

To clean the Shower Cubicle, I used a strong dilution of Tile Doctor Pro Clean which is a strong alkaline cleaner that works really well on grout. The Pro-Clean solution was decanted into a spray bottle and then sprayed onto the grout lines and left it to dwell. The air in the solution makes it lighter and easier for it to stick to vertical surfaces.

After a few minutes the Pro-Clean was scrubbed in using a stiff grout brush. The tiles were then rinsed with water to remove the soiled solution from the tiles and the process repeated where required.

Although cleaning process was a success there were still a few mould marks left so to tackle these I used Tile Doctor Mould Away spray using the same process of scrubbing and rinsing. The Mould Away spray did the trick for me and I moved on to remove the silicone around the shower cubicle. When removing silicone, you must make sure you get all mouldy silicone out otherwise it can spread from the old to the new.

Ceramic Tiled Shower Cubicle During Restoration Moston

After I had finished removing the silicone I tidied the shower cubicle and used a bit of gentle heat from my heat gun to dry the grout lines and edges where silicone used to be.

Grout Colouring a Ceramic Tiled Shower Cubicle

I used my damp tester to make ensure there was no dampness anywhere around the working area and then moved on to colouring the grout which would give the whole shower a fresh and consistent appearance. On this occasion, I used a White colour from the Tile Doctor range of Grout Colourant’s, it’s an epoxy based colourant that protects and rejuvenate the grout lines.

I had to use 2 coats of colourant to get the best result and then moved on to putting new silicone around the shower base with a high-quality mould resistant silicone. When finished adding fresh silicone I tidied up again and the job was complete.

Ceramic Tiled Shower Cubicle After Restoration Moston Ceramic Tiled Shower After Restoration Moston

I think you can’t argue the shower cubicle was transformed and customer even said it looks better then when it was new; we also fixed few chips for her whilst there and stripped and replaced the silicone around the sink as a bonus.

Ceramic Tiled Sink Grout Before Cleaning Moston Ceramic Tiled Sink After Cleaning Moston

 
 
Source: Ceramic Tile and Grout Cleaning Service in Machester

Treating Mouldy Grout in a Shower Cubicle in Cumbria

Grange-over-Sands is a quaint little town on the Morecambe bay, roughly halfway between Barrow-in-Furness and Kendal in Cumbria. I was recently contacted by a property owner in the area who had heard about Tile Doctor services and was keen to have us restore their tiled shower cubicle which, as you can see from the photos below, had staining and mould on the ceramic tile, grout and silicone sealant.

Shower Cubicle in Grange-over-Sands Before Cleaning

The shower cubicle was looking far from inviting and well in need of a good deep clean. I agreed a quote for cleaning and recolouring of the grout, and was soon on my way to the property to carry out the work.

Shower Cubicle in Grange-over-Sands Before Cleaning

Cleaning and Recolouring a White Tiled Shower Cubicle

I started by cleaning the dirty grout with Tile Doctor Mould Away, which is a fast and effective formula for the removal of mould from silicone and grout. I sprayed the product onto the tile and grout and left it to soak in for five minutes, before scrubbing the area with a stiff brush. I then rinsed the area with water, and repeated the process until the mould and staining had completely disappeared.

To guarantee the overall appearance I had agreed with the owner to apply a grout colourant to the grout. For best results, we recommend a pre-treater is applied to the grout first as it helps bond the grout colour to the Grout. The pre-treater was applied then the whole cubicle was rinsed.

The next step was to carefully strip out the old silicone sealant from around the base of the cubicle using a sharp blade.

Colouring Grout in a Shower Cubicle

The grout needs to be dry to take the colourant so after cleaning and pre-treating I dried the grout with a heat gun on a low setting.

Once I was happy the grout was dry I started the recolouring process using a White colourant from the Tile Doctor range which has ten popular colours to choose from including Charcoal Grey, Cappuccino and Black. This would ensure the grout matched nicely with the rest of the cubicle.

The colourant not only restores the colour, it also rejuvenates and seals the grout joints. The lastly step was to apply fresh white silicone around the base of the cubicle.

Shower Cubicle in Grange-over-Sands After Cleaning

I think you will agree from the photos of the finished result the whole cubicle looks much fresher and that it would be difficult to tell the difference from a new installation.

Shower Cubicle in Grange-over-Sands After Cleaning

 
 
Source: Shower Tile and Grout Cleaning Service in South Cumbria

Refreshing the look of Travertine Tile and Grout in a Shower Cubicle

This is a follow-up post from last week where I detailed the restoration of a beautiful polished travertine floor that had been installed on most of the ground floor and bathroom at a property in Newton Heath. After cleaning, polishing and sealing the floor tiles the owners asked if I could apply the same treatment to their Travertine tiled shower cubicle which was not looking its best and had become stained over time.

Travertine Shower Before Cleaning Newton Heath

Cleaning Travertine Shower Wall Tiles

First I successfully cleaned the grout with a medium dilution of Tile Doctor Pro-Clean scrubbed into the wall grout with a special stiff grout brush, the tiles were then rinsed with water and the process repeated until I was satisfied with the result.

Travertine Shower Before Cleaning Newton Heath

To clean the Travertine wall tiles I used the same Diamond pad system as I did on floor, starting from 400 grit and moving up to 3000 grit pads lubricated with a little water, the only difference this time was that I used smaller six inch pads fitter to a hand held burnishing machine.

Sealing Travertine Shower Wall Tiles

After I completed all the cleaning and the tiles had dried I proceeded to seal them with Tile Doctor Colour Grow sealer, this is the same sealer that I used on the floor and the excess was polished off with cotton cloths.

The last remaining step was to strip out the silicone sealant strip from around the base of the shower cubicle and replace with new. I used high quality anti mould silicone sealant that left nice lines and fresh look.

Travertine Shower After Cleaning Newton Heath

Needless to say, that customer was very happy with the work carried out on the floor and shower cubicle and recommended me to his neighbour straight away.

Source: Travertine Tile Cleaning and Restoration Service in Manchester

Giving a Cheshire Kitchen a Makeover with Grout Colouring

You often see some fantastic tiled surfaces transformations in lifestyle and home decoration magazines. This customer, who lives in Stockton Heath, had recently seen a feature in which an area of white kitchen tiles had been transformed by changing the white grout to a charcoal coloured grout, giving it a new and particularly striking appearance.

Grout before recolouring at Stockton Heath kitchen Grout before recolouring at Stockton Heath kitchen

Very impressed with the result, she wanted to know if Tile Doctor could do the same for her white kitchen tiles, which covered the majority of the room. I told her that not only could we do it – we could do it even better in the space of a day!

Here’s how we did it.

Cleaning and Recolouring White Kitchen Tiles

Our process for recolouring grout involves an application of a pre-treatment cleaner to ensure a complete refresh of both the grout and tiles. This pre-treatment cleaner removes any dirt and stains, as well as prepares the the grout joints for a superior bond with the Grout Colourant. I applied this carefully and scrubbed it in using a specialised grout brush, before drying the area with a heat gun.

It was then time to apply Charcoal Gray Grout Colourant, one of the options from our range of 10 Grout Colourants that includes Black, Ivory, and Cappuccino. Our Grout Colourant is an easy-to-use waterborne epoxy that not only recolours grout joints, but also seals and rejuvenates them to guarantee their long-term protection. This was applied using a good old fashioned toothbrush, and any excess was swiftly removed.

Grout during recolouring at Stockton Heath kitchen Grout during recolouring at Stockton Heath kitchen

To complete the process I removed the old silicone around the windows and worktops and replaced with a fresh batch. When the customer saw the finished result she was over the moon. She thought this kind of transformation could only be made with difficulty and at a high cost but we showed that it’s a very simple and cost-effective process for any home owner.

Grout after recolouring at Stockton Heath kitchen Grout after recolouring at Stockton Heath kitchen

 
 
Source: Grout Cleaning and Colouring Service in Cheshire

Removing Grout Smears From Terracotta Tiles

This newly installed Herringbone-style Terracotta tiled floor in a refurbished kitchen was heavily covered with patches of grout haze. The customer, who lives in the town of Cogenhoe, Northampton informed me that the tiler had supposedly sealed the floor before grouting. If this was true, the grout haze should have been very easy to remove.

However, the tiler had clearly not been entirely truthful as, when I arrived at the property to carry out a test clean, I found very little evidence of any sealer whatsoever. Nonetheless, I found that the grout haze was easily removed using a solution of Tile Doctor Grout Clean Up, a concentrated phosphoric acid cleaner which is designed specifically for the removal of haze, mineral deposits and efflorescence.

Herringbone design terracotta floor before Cogenhoe Herringbone design terracotta floor before Cogenhoe

These Terracotta tiles were very pitted and the original tiler was correct to fill the small holes with grout to complement the rustic look of the tiles, but he should have taken the correct measures to ensure that a white misty grout haze didn’t appear over the whole area!

The customer was happy for me to proceed with restoring the floor, but also very concerned that her newly installed hand painted kitchen units would be damaged by the chemical cleaning products. I assured her that I would cover them up completely and carry out all work along the plinths by hand.

Removing Grout Haze from Terracotta Tiles

Once on site, I covered the kitchen units to protect them and proceeded to mix up a solution of Grout Clean Up. This was applied firstly around the edges of the floor and scrubbed into the stone by hand using a stiff brush.

Working in areas of four square metres each so as to not the leave the product on the floor too long, I applied the solution to pre-wet the floor ready for the next part of the process. This was to apply Tile Doctor Acid Gel, our blend of phosphoric and hydrochloric acids, leave it to dwell for a few minutes has then agitate it to neutralise and remove the copious grout haze. Once each area had been treated I rinsed it with water to remove any chemicals.

Herringbone design terracotta floor during Cogenhoe Herringbone design terracotta floor during Cogenhoe

Sealing Terracotta Tiles

With the entire floor treated, I installed a dehumidifier to help the tiles to dry quickly overnight. The next day I returned to the property to apply two coats of Tile Doctor Colour Grow sealer. This is an impregnating sealer which provides robust protection while also lifting the natural shades in the Terracotta.

Each coat was polished in by hand, leaving an hour for drying between coats. I then waited another hour before giving the whole floor a final polish with a buffing machine to remove any excess sealant.

Herringbone design terracotta floor after Cogenhoe Herringbone design terracotta floor after Cogenhoe

The result achieved in the space of 24 hours was fantastic and the customer was exceptionally pleased. Despite the severity of the grout haze problem, the combination of the right products allowed me to handily resolve it. The addition of a properly applied and top quality sealer will help to ensure the floor is protected from staining, something which is essential in a kitchen.
 
 
Source: Tile and Grout Cleaning Service in Northamptonshire

Shower Cubicle Grout Cleaned and Recoloured in Cheshire

It’s not unusual for Shower tile and grout to become stained due to the dyes that are found in soap, mould can also be a common problem but usually this is down to inadequate ventilation. Whilst we do sell products that can keep your tile and grout clean we are also able to assist when a really deep clean is required. The photographs below are a great example of this and are of one of three shower cubicles we were asked to clean and restore at a modernised Victorian property in Sale, Cheshire.

Shower cubicle before cleaning in sale Cheshire Shower cubicle before cleaning in sale Cheshire

Cleaning Ceramic Tile and Grout

We started by spraying the tile and grout down with Tile Doctor Pro-Clean which is a strong alkaline cleaner, spraying it on mixes it air which helps it to stick to Vertical surfaces allowing it to get to work on the dirt. We left it to dwell for ten minutes before scrubbing it in by hand using a stiff grout brush; this process certainly improved the grout but unfortunately it had become too badly stained to be satisfactory so we decided to recolour the grout using a white grout colourant.

To get the wall tiles and shower glass clean we sprayed on Tile Doctor Oxy-Pro, again leaving it to dwell for a while before gently scrubbing it away with water. Once dry we set about stripping off the silicone strip around the base of the shower wall which was stained and impossible to get clean again.

Recolouring Grout

The grout colourant comes in a tube and is very straightforward to apply although I must admit the work is quite tedious. Two coats of white colourant were required to get the uniform appearance needed and I think you will agree the effect is quite transforming. The other advantage of these particular colourant products is that they are epoxy based and form a barrier of the grout preventing future staining and making it very easy to clean going forward.

The last step was to apply new silicone along the base of the cubicle and give the tiles a quick buff.

Shower cubicle after cleaning in sale Cheshire Shower cubicle after cleaning in sale Cheshire

I think you will agree it was quite a transformation and the cubicle now looks like it was recently installed.
 
 
Source: Tile and Grout Cleaning Service in West Cheshire

Rejuvenating Bathroom Tile Grout

Here’s a quick example of an interesting tiled shower cubicle at a property in Edinburgh that was well overdue for a refresh, including deep cleaning and recolouring do the grout lines that had become stained and mouldy. This is a problem that the majority of property owners experience due to the simple fact that shower cubicles come into contact with damaging acid-based shampoos and soaps on a daily basis.

The short-term solution for this is to wash the shower cubicle down with water after each use, however busy people do not always remember to do so! The prognosis is bad discolouration, mould growth and staining if the problem if proper care isn’t taken. In this case, the problem had worsened to the point that the property owner decided to contact Tile a Doctor to provide a thorough refresh of the tiles.

Edinburgh bathroom before grout refresh Edinburgh bathroom before grout refresh

Cleaning Stained and Discoloured Shower Cubicle Tiles

Our process for refreshing shower cubicles in a similar state to this one is simple, but highly effective. I started by mixing a strong solution of our high alkaline cleaner, known as Tile Doctor Pro Clean (diluted to an appropriate level with water), before applying it directly to the tile and grout.

Next, I worked it in using specialised handheld grout brushes , with the alkaline in the Pro Clean neutralising the acidic staining and mould growth had leaving the area clean and fresh. Pro Clean is suitable for use on all kinds of natural stone, and on both verticals and horizontal surfaces. Once satisfied the grout had been cleaned to the best of my abilities, I quickly dried the entire area using a heat gun.

Recolouring Shower Cubicle Grout

To restore the appearance of the installation back to it’s optimal appearance I chose to recolour the grout lines with our Light Grey grout colourant, which matched in very nicely. This is just one of ten different colours of grout colourant we offer. The colourant was left to dry for a short period before I cleaned off any excess. The final stage of the refresh involved stripping off the old discoloured silicone from around the bath and replacing it with fresh silicone.

Edinburgh bathroom before grout refresh Edinburgh bathroom before grout refresh

The customer was very impressed by the speed and efficiency of the refresh. With the work completed to a high standard in just a few hours, she now has one less problem to worry about – and a very smart looking shower cubicle! Another satisfied customer.
 
 
Source: Tile and Grout Cleaning and Renovation Service in Edinburgh

Refreshing the Appearance of Bathroom Grout

We commonly encounter customers who are struggling to keep their Ceramic tiled shower cubicles clean. Since most people use their showers every day, the tiles and grout inevitably come into contact with shampoos and soaps that can cause staining, discolouration and mould. In fact, it’s not uncommon for property owners to completely give up on trying to clean the tiles, especially as many everyday cleaners are ineffectual, and this allows the situation to worsen over time.

This customer, who lives in Hale Village – known to be one of the UK’s quietest and best kept villages despite being just outside the busy city of Liverpool – was fed up with the state of her tiled shower cubicle and decided to seek professional assistance. I explained that with regular maintenance using suitable products, the tiles could be easily kept clean. I visited the property to show her first hand the results that could be achieved by cleaning and recolouring the grout.

Ceramic bath tiles before refresh Hale Village Ceramic bath tiles before refresh Hale Village

Grout Cleaning and Recolouring Ceramic Bathroom Tiles

The ideal product for cleaning grout that has become affected by mould is Tile Doctor Mould Away, a fast and effective formula that can be directly applied. After applying the Mould Away I allowed it to soak into the grout for 20 minutes, before scrubbing it in with a special handheld brush. I also scrubbed it into the tiles to remove any excess staining caused by coming into contact with shampoos and soaps.

After completing a thorough clean of both the grout and tiles, it was time to remove the old silicone sealant from around the edges of the bath, and replace it with a fresh white sealant. I then opted to recolour the grout to match it with the tiles and the new sealant, doing so carefully with Tile Doctor’s own White Grout Colourant. This is just one of ten different Grout Colourant options we offer. Other options include Charcoal Grey, Black and Cappuccino Brown to much different colour tiles.

Ceramic bath tiles after refresh Hale Village Ceramic bath tiles after refresh Hale Village

The combination of cleaning and recolouring completely refreshed the appearance of this Ceramic tiled shower cubicle, to the point that it almost looks new. Needless to say my customer was very happy, and can see now just how easy it can be to keep these tiles looking good using the right products.
 
 
Source: Bathroom Tile and Grout Cleaning Service in Cheshire

New but Discoloured Grout refreshed in a Warrington Kitchen

It can be amazing and equally frustrating just how quickly grout can become dirty and discoloured. I was recently contacted by a couple in Warrington to see if I could help them with their Ceramic tiled kitchen floor that had only been laid six months earlier. To their dismay, in that short time the grout had become discoloured and difficult to clean. They had given up trying to resolve the situation by themselves and so turned to Tile Doctor for some professional assistance.

Naturally I was happy to assist and so arranged to visit the property to conduct a small cleaning test where I demonstrated how with a combination of the right tools and products I could indeed get the grout lines clean again. Seeing the results of the test, the couple were more than happy to book me to complete the job.

Kitchen tiles before cleaning and grout recolour in Warrington

Grout Cleaning for Dirty Ceramic Tiles

On my return to the property, I repeated the same successful test clean across the entirety of the floor. This involved the application firstly of Tile Doctor Remove and Go, which is a strong cleaner, stripper and degreaser. I scrubbed the product thoroughly into all the grout lines, making sure I did not miss any dirt and stains.

I then started to clean the Ceramic floor tiles using our high alkaline cleaner, Tile Doctor Pro Clean. This was scrubbed into the floor in a similar fashion to the Remove and Go and then rinsed off with plain water extracting the waste water with a Wet Vat. The floor was left to dry over lunchtime.

Recolouring Grout for Ceramic Tiles

In the afternoon, I explained that whilst I could get the grout clean it was only a matter of time before it became dirty again. So, to provide a permanent solution I recommended to the customer that we apply an epoxy Grout Colourant, which adds a protective barrier over the grout. An alternative would have been to apply a Grout Sealer however this is best applied to new grout and in this case would not have guaranteed the uniform appearance required.

Before applying the Grout Colourant, I made sure the grout lines were dry by giving them a quick blast with a heat gun. I then started to colour the grout lines with our White Grout Colourant, which is part of a range made by Tile Doctor and is available in ten popular colours, including Black, Charcoal Grey and even Cappuccino Brown.

The difference made to the floor was quite remarkable. Not only is the grout now a uniform brilliant white, but it should remain so for a long time to come. You can see this yourself in the photograph below!

Kitchen tiles after cleaning and grout recolour in Warrington

 
 
Source: Tile and Grout Cleaning and Restoration Service in West Cheshire

Restoring the Appearance of Grout on a Tiled Kitchen Worktop

Tiled kitchen worktops work really well, but just like any other kind of tiled surface they will need regular cleaning and maintenance to keep them looking great. Kitchen worktops in particular can fall into poor condition quickly when exposed to all manner of dirt and stains resulting from food preparation, with the grout lines often suffering the most which if you have tiles in your shower is a problem I’m sure you will be familiar with.

Mosaic tiled worktop before grout colouring

The grout lines on this Mosaic tiled kitchen worktop had become discoloured following years of exposure to soaps and washing up liquid from the nearby sink, as well as, most likely, food and drink spillages. The property was in the picturesque village of Silverdale, Morecambe Bay, and the owner had decided it was time to have the worktop professionally refreshed. This was a job that would only take a few hours to complete, and would involve both grout cleaning and recolouring.

Mosaic tiled worktop before grout colouring

Cleaning and Recolouring Dirty Grout for a Mosaic Worktop

Before beginning the restoration, I had to decide upon the best method. I realised that if I took out the grout to replace it completely I may have dislodged or even damaged the tiles – especially considering that they are at least 30 years old and give the age of the tiles it would be difficult if not impossible to find replacements if they were damaged.

As a result, I opted to clean the tiles and grout using Tile Doctor Oxy Gel. This product is a strong alkaline-based cleaner in gel form designed to break down dirt and grime, including soap scum and mildew stains. While it can be used on both horizontal and vertical surfaces, it is particularly suitable for the latter as the gel is able to dwell for a long time without running down the wall. Oxy Gel proved to be very effective in restoring the grout lines to top form, but I chose to follow by steam cleaning the area to get rid of any bacteria.

Mosaic tiled worktop during grout colouring

To finish the restoration, I recoloured the grout lines using our fresh White grout colourant – one of 10 available colours. Tile Doctor’s grout colourant seals and rejuvenates existing grout joints, and is equally effective for interior or exterior applications, including bathrooms and kitchens. The colourant was left for a little while to cure, before I polished off the excess with white sponge pads.

Mosaic tiled worktop after grout colouring

The result was a quick and effective transformation for the Mosaic tiled kitchen worktop that left the customer very happy!
 
 
Source: Worktop Tile and Grout Maintenance Service in Lancashire

Dealing with Mould on Grout

A common problem with bathroom and shower cubicle tiles is the appearance of mould on the tile, grout and silicone which if not tackled on a regular basis will spread and threaten to severely damage the appearance of the tiles, along with the silicone. This problem is usually due to inadequate ventilation however the good news is that with early intervention with Tile Doctor Mould Away spray the problem can be reversed.

The two photos below show a bad case of this very problem at a property in Northampton, where you can see that the grout and silicone sealant had become black with mould.

Mouldy shower cubicle before Northampton Mouldy shower cubicle before Northampton

Cleaning and Repairing Damaged Shower Cubicle Grout

Firstly, I decided to cut out the damaged grout with a hand held disc cutter and remove all the silicone at the base of the shower. To treat the less invasive mould in the rest of the cubicle I sprayed it with Tile Doctor Mould Away, which is specifically designed to remove mould from silicone and grout.

I sprayed the product onto the affected areas and left it to dwell for five minutes, before scrubbing it in with a stiff grout brush, resulting in a good clean. The area was then rinsed with plain water. Finally, I replaced the grout and the silicone that I had removed earlier with a flexible grout and a white silicone, both of which include a mould inhibitor.

Mouldy shower cubicle after Northampton Mouldy shower cubicle after Northampton

The photographs above show the end result. The customer was very happy with her refreshed tiles, and left the following feedback:

“Phil was brilliant – both when he came to look at the job and then when he returned to actually make the grout repairs. Most importantly he explained what was (and wasn’t possible) and did exactly what he said he would do. My shower area now looks brilliant and I’m no longer showering in fear of the tiles falling off the wall! Honest, clean, timely and totally professional. A tremendous job well done. Thank you.”

I left the customer with a bottle of Tile Doctor Aqua Pro to aid with regular cleaning. If used once or twice a week, this product will help maintain the condition of the grout. I also advised the customer that it is good practice to rinse the tiles down with plain water using the shower head after each shower to remove any soapy residue which can slowly discolour and stain grout over time.
 
 
Source: Shower Tile and Grout Maintenance Service in Northamptonshire

Removing Varnish From Grout in Harrogate

I was recently at a property in the North Yorkshire town of Harrogate, undertaking what I initially thought would be the cleaning and polishing of a Cream Limestone tiled kitchen. However, as I began the cleaning process I quickly discovered that under the dirty grout lines someone had taken a lot of effort to paint with a small brush directly onto the grout using varnish!

Cream limestone floor before cleaning Harrogate Cream limestone floor before cleaning Harrogate

Removing Varnish from Grout

In a normal situation, I would have covered the whole floor with Tile Doctor Remove & Go to solve the problem, however compared to, say, adhesive or paint staining, varnish is very difficult to remove. So instead I opted for the long, yet necessary process of cleaning the grout manually with several thin wire brushes. Over the course of two days I managed to remove approximately 90% of the stubborn varnish – and could finally move onto cleaning and polishing the Limestone as originally planned.

Burnishing and Sealing a Limestone Tiled Kitchen Floor

The polish had been lost from the Limestone kitchen tiles over time, so I set about restoring it using a type of polishing known as burnishing. This involves the application of diamond encrusted pads of varying grit to the floor to gradually buff the stone and achieve an aesthetic and durable shine. Burnishing is most commonly used on high-end stone such as Marble, Travertine and, of course, Limestone.

At Tile Doctor, our burnishing system comprises four burnishing pads, ranging from a Coarse grit to a Very Fine grit. After applying the first three pads (Coarse, Medium and Fine), I gave the tiles a further clean with Tile a Doctor Pro Clean, which is our alkaline cleaner, to remove any residue from the burnishing process. I then rinsed the floor with clean water and soaked up the residue with a wet vacuum, before leaving it to dry.

The floor was then polished to a satin finish using the fourth and final Extra Fine burnishing pad. I sealed it using a couple of coats of Tile Doctor Ultra-Seal, an impregnating sealer designed to provide maximum protection against dirt and stains.

Cream limestone floor after cleaning Harrogate Cream limestone floor after cleaning Harrogate

The combination of burnishing and sealing always makes a huge difference to Limestone tiles. Here, the finished result was almost like a new floor! The customer was both amazed and very pleased with the transformation.
 
 
Source: Limestone Tile and Grout Cleaning and Maintenance Service in North Yorkshire

Grout Damaged with Acid Restored with Grout Colourant in Cheshire

It’s always a good idea to double-check any tile cleaning advice you receive with a professional. Sometimes advice can be inaccurate and cause more problems than good. Such was the case with this customer, who lives in the small town of Appleton near Warrington. He had been advised by his builder to use brick acid to remove carpet glue from a newly discovered Quarry tiled floor. Taking the advice, he had washed the floor several times with a solution of brick acid diluted with water. But while this seemed to successfully remove the carpet glue, it also severely discoloured the grout lines, leaving the entire floor looking grubby and unappealing.

The customer was just about to go on holiday, and asked me to see what could be done to restore the floor’s appearance while he was gone. With the house to myself, I got to work.

Quarry Tiles Before Cleaning in Appleton

Cleaning a Stained Quarry Tiled Floor

My first job was to strip the floor property to remove old sealers present on the tile using a strong dilution of our high alkaline cleaner, Tile Doctor Pro Clean. We use this cleaner on all types of tile and natural stone due to its versatility and consistency.

I spread the solution onto the floor and left to dwell for twenty minutes before scrubbing with a black pad fitted to a floor rotary machine. This process also removed the years of dirt and dust that had penetrated through the recently removed carpet. I also paid attention to the grout lines giving them a good scrub with a stiff grout brush, but the acid staining proved to be impossible to remove completely.

While I’m not sure exactly how long the floor had been covered by carpet, it’s safe to say a deep clean had been long, long overdue. Once I had cleaned the floor to a high standard, I used a wet-vac to remove the now dirty cleaning solution from the floor, before leaving it to dry off completely overnight.

Sealing a Quarry Tiled Floor

Upon my return to the property the next day, I tested to make sure the floor was dry enough to seal, which is important as excess moisture can cloud the sealer and damage its performance.

Once satisfied, I applied one coat of Tile Doctor Colour Grow, which is our impregnating sealer designed to really bring out the natural colours in the tile, followed by two coats of Tile Doctor Seal and Go to give the tiles a stain resistant, low-sheen finish.

After this was dry I coloured the grout lines with a matching Tile Doctor Grout Colourant to cover and hide the damage the acid had caused to the grout lines. Finally, I gave the floor three more coats of Seal and Go to add the finishing touches.

Quarry Tiles After Cleaning in Appleton

My customer returned from holiday to find a completely transformed floor. Looking at the before and after photos, it is easy to see why he was more than happy with the result! Another satisfied customer.
 
 
Source: Tile and Grout Restoration Service in Cheshire

Dealing With Discoloured Shower Cubicle Grout

Shower cubicles can be the most difficult of tiled features to keep clean. Most are exposed to various acid-based soaps and shampoos on a daily basis, allowing mould and general muck to quickly build up along the grout lines and silicone. This leaves the entire area looking quite unappealing. In some cases, the grout lines become stained beyond a point where they can be restored to their original condition, so property owners will typically request to have the grout cut out and replaced however a faster and cheaper method is to have the grout completely recoloured.

Such was the case with this Ceramic tiled shower cubicle at a house in Wigan. It would take a lot to get the cubicle looking great again, having not been cleaned properly for a long time. The property owner decided to contact me for a professional refresh, including cleaning, new silicone sealer and recolouring of the grout.

Ceramic Shower Cubicle Before Refresh Wigan

Cleaning a Ceramic Tiles Shower Cubicle

I started the refresh by applying Tile Doctor Mould Away spray to the tiles and grout, and leaving it to dwell for an hour. As the name of the product suggests, Mould Away is a fast and effective cleaner for the removal of mould from silicone and grout, making it ideal for use on shower cubicles similar to this one. I then rinsed the entire area down with water before scrubbing the grout lines and tiles with a stiff grout brush to remove any remaining mould and lime scale, leaving them looking a lot cleaner.

Colouring Grout in a Ceramic Tiles Shower Cubicle

The cleaning process made a big improvement however the grout was still too stained so after removing the silicone strip from around the base of the shower I proceeded to recolour with our white Grout Colourant. The colourant is painted onto the grout and any excess is wiped of the tile before it dries which both improves the appearance of the grout and seals it in to protect it from further staining. The last step was to apply fresh white silicone along the base of the shower.

Ceramic Shower Cubicle After Refresh Wigan

The customer was very pleased with the refreshed appearance of their shower and you must admit it looks much more inviting now.
 
 
Source: Ceramic Tile Clearing and Restoration Service in Greater Manchester