The home owner of this house in Stockbridge had become increasingly unhappy with the state of their ceramic tiled floor and we were asked to come in and give the ceramic tile and grout a thorough deep clean.
Cleaning and Preparing the Tile and Grout
To get the tile and grout clean I applied a dilution of Tile Doctor Pro-Clean and left it to soak in to the surface dirt for a while before scrubbing it with a rotary machine fitted with a black scrubbing pad and also a stiff hand brush along the grout lines. This was then washed down with warm water all of which was removed by a wet Vacuum. This cleaning process was repeated until the tiles were clean and the grout was a good as I could get it. Unfortunately the grout had stained quite badly and we were unable to get a good uniform appearance so it was agreed that we would applying a white Grout Colourant.
Applying Grout Colourant
The grout colourant range sold by Tile Doctor are a huge improvement on those grout pens you will find in DIY stores, they come in a range of colours and form a hard wearing epoxy barrier over the existing grout that looks natural and effectively protects the grout from further staining.
The grout needs to be clean and dry before you apply it so if you’re doing this from scratch make sure you clean the grout first with Pro-Clean or the Pre-Treater product that is available. The grout colourant is then easily applied using a toothbrush, it sounds easy but you have to be very methodical. The colourant dries in about an hour after which it’s worth double checking your work and then removing any excess by applying a little water and running over it with a white pad.
I think you will agree from the photographs the tiles look much cleaner and the change in grout colour makes the floor look that much fresher, it will also be a lot easier to maintain going forward.
This Ceramic tiled shower cubicle was installed at house in Birmingham, although the Ceramic tiles were in reasonable condition the customer wanted the grout to be refreshed. Ten years ago it would have been necessary to scrape out the top layer of grout and replace however the modern grout colourant kits allow you to achieve the same effects for a lot less expense.
Cleaning Tile and Grout
The first job was to clean the grouting with a dilution of Tile Doctor Pro-Clean worked in by hand using a scrubbing brush, we also removed the towel radiator on one wall to make sure we could get to the grout behind. Pro-Clean is a very effective tile and grout cleaner that’s good at getting grease & grime out of the grouting, this process also provides a good foundation for the grout colourant which needs a clean surface. If you’re cleaning the grout yourself you may want to consider using Tile Doctor Oxy-Pro instead as it’s a similar product that is ready to use.
Once the grout was dry Grout Colourant in a Linen colour was applied into the grout lines and the excess wiped off, I then cleaned off all the excess Grout Colourant from the tile surface and gave the tiles a good clean. As you can see it made a big difference to the bathroom and I think you will agree the choice of Linen colourant worked well and blended in well with the colour of the tiles needless to say the customer was delighted.
I should mention that the Grout Colourant range supplied by Tile Doctor also seals the grout preventing it from staining and therefore ensuring it will look good for some time to come.
This Porcelain hallway and kitchen floor in Teddington, Middlesex, had extensive soiling in the grout lines and some staining on some of the Porcelain tiles from drink spillages. Porcelain is very robust material but like any surface the sooner you clean-up a spillage the less staining you are likely to experience.
Cleaning Porcelain Tile and Grout
To clean the tile and grout I applied a dilution of Tile Doctor Pro-Clean, which is an effective Tile and Grout cleaner, with a mop and left it to soak in for a while before working it into the floor using a rotary machine fitted with a black scrubbing pad and a stiff brush along the grout lines. The soiled cleaning solution was removed using a wet vacuum and rinsed down with clean water. This process was repeated until I was satisfied the tile and grout was clean.
I then waited for the floor to dry before applying a coat of Tile Doctor Grout Sealer to the grout lines in order to help make future maintenance easier, this type of Porcelain did not need sealing so only the grout would benefit from this preventative measure. The process is very straightforward and can be sprayed onto the grout line wiping off the excess from the adjacent tile within a few minutes.
I think you will agree from the photographs that the grout which was very prominent has now almost disappeared restoring the floor to its original appearance.